extra parts

B16, B18, B20
 Reply

extra parts

By KingcoupeO
- Tue Sep 15, 2009 2:32 am #143748 there is a wierd black metal tubular pice that sits on to of the fuel rail. intake manifold area with hoses on it . one goes to the intake and one is coolant off the head leading towards something else . can i connect the coolant run with one single hose and put a breather on my valve cover ?
what do i do with the intake hose then ?

and a seprate question , there is a little black rectangle thing with 2 hoses running to it on top of the intake manifold. what does that thing do ? where do those hoses go ?
mines never hooked up its a hose to no where or at least one of them is , not sure where the other one goes ....any ideas?
User avatar

By Greasedmonkey
- Tue Sep 15, 2009 11:47 pm #144007
94_jdm_ferio wrote:pics?
User avatar

By That One Dude
- Mon Sep 21, 2009 9:54 pm #145678 The tubular piece connects the intake tube and the valve cover. You can remove it, put a breather filter on the valve cover and plug the hole in the intake tube. With the coolant line, you can splice the two rubber hoses together and trash the tubular piece.

I did that yesterday morning.

There's no performance gain, but you won't have as much oil vapors going into your cylinders.

By KingcoupeO
- Mon Sep 21, 2009 10:48 pm #145687 dude o dod the same exact thing yesterday haha
looks so much cleaner
User avatar

By That One Dude
- Mon Sep 21, 2009 10:55 pm #145688 Roger that.
User avatar

By ikon
- Tue Sep 22, 2009 1:38 am #145717 the second thing is your evap canister. it sits against the firewall right?

By KingcoupeO
- Tue Sep 22, 2009 1:07 pm #145857 no no , i have 2 threads going about 2 diffrent things i need to clarify with pictures i will make sure i do that this week .
User avatar

By Greasedmonkey
- Wed Sep 23, 2009 2:33 am #146124 pictures make everything easier.
 Reply
Return to B Series