B16, B18, B20
By Adrian91
#232756 [/quote]

If you have one available and know how to install it yea. :thumb:[/quote]

Dont have one but it would be cheaper to take that route than buy a new dizzy?
User avatar
By Eg6H2D
#232788
Adrian91 wrote:


If you have one available and know how to install it yea. :thumb:[/quote]

Dont have one but it would be cheaper to take that route than buy a new dizzy?[/quote]
This is what your looking at..

http://cgi.ebay.com/ebaymotors/MSD-Acur ... 336370524d
User avatar
By Eg6H2D
#232922 not sure if MSD's Blaster coil will work without the ignition box.. you'd have to look that up. id doubt it..
By Adrian91
#232950 ok cool. Ill let you know what i do. Let you know if it helps. Thanks for all the help
User avatar
By suspendedHatch
#233046 Fix that idle problem before you waste your money on anything else. This is most likely the source of your other problem.

Check the FITV if your motor has one. Check the throttle body and intake manifold gaskets.

Almost certainly some part of the swap wasn't done correctly. Revving to 3k at idle is ridiculous.
By Adrian91
#233072
suspendedHatch wrote:Fix that idle problem before you waste your money on anything else. This is most likely the source of your other problem.

Check the FITV if your motor has one. Check the throttle body and intake manifold gaskets.

Almost certainly some part of the swap wasn't done correctly. Revving to 3k at idle is ridiculous.


Whats the FITV
By Adrian91
#233131 no i dont have FITV. Thinking since my car revs to 3k warming up and bounces rpms and have performance issue. Instead of dizzy could be like a big vacuum leak. maybe intake gaskett?
User avatar
By flyinryan122
#233132 Start the car, grab a can of brake clean, and spray around your intake mani, throttle body, etc. When the cars idle drops, you'll have found your leak. If that is the problem
User avatar
By flyinryan122
#233134
EG6b20R wrote:not sure if MSD's Blaster coil will work without the ignition box.. you'd have to look that up. id doubt it..
And yes, you can install an msd coil with out the ignition box
By Adrian91
#233158
flyinryan122 wrote:
EG6b20R wrote:not sure if MSD's Blaster coil will work without the ignition box.. you'd have to look that up. id doubt it..
And yes, you can install an msd coil with out the ignition box

Thats what i thought. I kept going over that in my head.