what b series head could this be?
Posted:
Thu Mar 04, 2010 4:06 pmby kinta94
i want to do a trade for this head but when i asked what head b16/b18/b20 it was he said he didnt know?
okay well FML i cant get onto photo bucket someone just let me send them an email i need to figure this out
well could anyone help me figure it out?
Posted:
Thu Mar 04, 2010 4:12 pmby chrono404
any pics? #'s off the head? non-vtec or vtec??? We cant give you an answer with no information to go off of.
Posted:
Thu Mar 04, 2010 4:18 pmby forcefedEG
chrono404 wrote:any pics? #'s off the head? non-vtec or vtec??? We cant give you an answer with no information to go off of.
numbers help big time lol
p30 - b16/b17
p72 - 94+ gsr
p75 - 94+ LS (and some USDM B20's)
pR4 - 92-93 LS
p8R - jdm b20
(years may not be exact but its in the ball park)
Posted:
Thu Mar 04, 2010 4:42 pmby kinta94
okay well FML i cant get onto photo bucket someone just let me send them an email i need to figure this out
Posted:
Thu Mar 04, 2010 4:45 pmby forcefedEG
email is
smokumoff@yahoo.com but itll be a little before i can get on there
Posted:
Thu Mar 04, 2010 4:49 pmby forcefedEG
pm me for my cell number if you can send me a pic message... thatd be quickest lol
Posted:
Thu Mar 04, 2010 5:40 pmby forcefedEG
Posted:
Thu Mar 04, 2010 5:51 pmby forcefedEG
i never realized there were 2 gens of zc motors... im kinda glad this came up because now i know!
Posted:
Thu Mar 04, 2010 6:19 pmby Classiccarsrule85
forcefedEG wrote:i never realized there were 2 gens of zc motors... im kinda glad this came up because now i know!
Theres actually 3 gen zc's 4 if you count teh rovers motor as a different gen lol.....
first gen teg
88-91 civic
92-95 civic
Posted:
Thu Mar 04, 2010 6:27 pmby forcefedEG
Classiccarsrule85 wrote:forcefedEG wrote:i never realized there were 2 gens of zc motors... im kinda glad this came up because now i know!
Theres actually 3 gen zc's 4 if you count teh rovers motor as a different gen lol.....
first gen teg
88-91 civic
92-95 civic
yea true... lol theres the 86 to 89 90 to 91 and then they used them in 92 to 95 in japan right?
Posted:
Thu Mar 04, 2010 6:34 pmby forcefedEG
found this on wiki lol they actually used them in 86 and 87 lol
1st Gen ZC Identified by: External coil, small distributor, dual butterfly TB, cam cover bolts on top, brown/gold cam cover. Large cam pulleys. +3cc PG6B pistons, non-pent roof combustion chamber. As a ZC it appeared in JDM AV Integra Si and JDM E-AT Civic/CR-X Si. Commonly produced at the time but now over 20 years old and getting harder to find. D-series version D16A1 '86-'87
2nd Gen ZC (rarest) Identified by: Internal coil, large distributor, single butterfly TB mounted on slight angle forward, bolts on top of cam cover, black cam cover, large cam pulleys. +7cc PM7 pistons, 43 cc Pent roof combustion chamber. As a ZC appeared in JDM facelift AV bodied Integra Si did not appear in Civic or CR-X, rarest ZC only produced for less than one year. D-series version D16A1 '88-'89 (sometimes +7cc P29 pistons)
3rd Gen ZC Identified by: Internal coil, large distributor, single butterfly TB. Black cam cover. Cam cover bolts on the sides. Small cam pulleys. Inlet Manifold stamped PM7. +7cc PM7 pistons, 43 cc Pent roof combustion chamber. As a ZC appeared in JDM EF3 civic and EF7 CR-X, did not appear in an Integra body. Most commonly produced ZC, manufactured in Japan from end of '87 through to early '91 D-series version D16A8/9 (Euro Civic Si) (sometimes +7cc P29 pistons)
4th Gen ZC Identified by: Internal coil. OBD1 EFi system (grey plug). No cam angle sensor on exhaust cam, now located in distributor. Rubber plug where cam angle sensor would mount. Black cam cover. No PGM-EFi plate on the inlet manifold, replaced with three ribs instead. P29 stamped on inlet manifold. MAP sensor on TB. +7cc PM7 pistons, pent roof combustion chamber. As a ZC only appeared in EG5 Civic bodies, no Integra or CRX received this engine. Reasonably common produced from '92 to '94. (20th Anniversary edition & Japanese car of the year) D-series version D16A8/9 (Euro & Australia Civic Si & NZ Civic Gti) (sometimes +7cc P29 pistons)
Posted:
Thu Mar 04, 2010 6:55 pmby forcefedEG
Carfanatic wrote:<3 ZC engines 
never had one of my own< but a good friend had one and it did run very strong
he got rid of it a long time ago... we didnt know alot about anything then though hahaha
Posted:
Thu Mar 04, 2010 7:40 pmby kinta94
Well if this guy has the second gen I'm deffinetly going to pick it up and try my best to put it on one of my d15 blocks