Page 1 of 1
dsm injectors in b18c
Posted:
Sat Jan 15, 2011 4:07 amby egjoshb18c
i was reading up on putting dsm 450cc injectors in bseries engines was wondering if anybody has had anyluck in doing so, how well did it run
Posted:
Sat Jan 15, 2011 4:43 amby JUICE
if they're clean/low mile or sold as 'refurbished' they'll do just fine for up to around 250-300 whp..
this is for a boosted setup,right? otherwise, the stock injectors are plenty for NA setups
Posted:
Sat Jan 15, 2011 4:45 amby egjoshb18c
its built na with about 11:1 comp with cams but im going to swap the pistons and do a turbo build it has everything to withstand the pwer except the piston cuz comp is high
Posted:
Sun Jan 16, 2011 6:26 amby Greasedmonkey
They work just fine IF you install them correctly. You will have to add in resistors in the wiring for them to work.
Posted:
Sun Jan 16, 2011 2:19 pmby teal_dx
moved to B series
Posted:
Mon Jan 17, 2011 4:35 pmby greengoblin
You can install the dsm 450s, if you do you need the resistor box, plus aside from that you will have to get your car on a different basemap with the new injectors. Your car will run really rich or not run at all with the stock ecu.
Posted:
Mon Jan 17, 2011 7:55 pmby 93hatcheg
now are all dsm injectors 450cc??
cause i found some blue top dsm injectors in my junkyard for only 40 and was going to buy them but someone said that automatic dsm had smaller injectors than the manual? i mean its a turbo dsm should be same right?
Posted:
Fri Jan 21, 2011 3:05 amby Greasedmonkey
not all of them are. They must come from the Turbo models.
Posted:
Mon Jan 24, 2011 3:27 amby stenberg83
automatic turbo dsms run 390cc injectors, while manual turbo dsms run 450cc blue tops and black tops