Page 1 of 1
How do i put a B in my DX?
Posted:
Sat Apr 02, 2011 4:00 pmby Civvy
Are the mounts axles the same?
Posted:
Sat Apr 02, 2011 4:39 pmby Ecc0
UK DX's are well different to the esi's and vti's you will need
B series engine
B series mounts
B series axel's
Vtec engine loom
esi/vti fuel tank
P28/P30 ECU
car side loom or re wire existing loom to have vtec
I would also upgrade your brakes, wheels hubs, brake master cylinder & subframe
Thats your basic list of what you'll need think there might be a few other bits like usual extras to the engine itself
Posted:
Sat Apr 02, 2011 4:45 pmby Civvy
Cool man; thanks! I guess the axles would fit since there is a b series eg.
Trouble is: Hasport has many individual mounts, therefore i don't know which to buy!
I intend to run a B20b for a while as it's my daily.
Posted:
Sat Apr 02, 2011 5:12 pmby Ecc0
DX axels won't fit you will need b series ones.
The mount for a B16 and different to those used on a B20
Posted:
Tue Apr 05, 2011 1:46 pmby Civvy
I'm still not clear on which mounts to order from Hasport, or if i should just cut and weld the brackets in from a VTI.
I assume it's the block mounts which are different with the B20 because it's from a CRV?
Posted:
Tue Apr 05, 2011 2:54 pmby cjw_89
the whole eninge, trans,shifter,starter,alt,power steering pump,axles,p75 ecu b18b1 thats is,harness,throttle cable,thats about about it
Posted:
Tue Apr 05, 2011 2:54 pmby cjw_89
the only mount you can use over is the pass side top mount its the same on civic/integra 5spds
Posted:
Wed Apr 06, 2011 8:41 amby Civvy
Guyz...
All i want to know is how the engine mounts, i.e. Do i need to cut out and weld in new side/ rear mount brackets and change the crossmembers for VTI crossmembers?
I've decided on B16 turbo.
I've realised i would also need the engine and it needs oil, thanks boyz!
Posted:
Sat Apr 09, 2011 5:53 pmby Type-Are
hasport sound have a package called "b-series" mounts. dont forget the tranny bracket ;]
Posted:
Sat Apr 09, 2011 7:35 pmby JUICE
no need to cut out and weld in anything..
ALL hydro B series mounts for an EG are the same. B18c B18b B20 B16 doesn't matter. if you got it on a hydro B tranny they're all gonna mount the same. I love my Hasports
heres the kit i bought..
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320567284615&ssPageName=STRK:MEWNX:IT