Vacum lines

B16, B18, B20
 Reply
User avatar

By forcefedEG
- Wed Apr 13, 2011 12:50 am #250072 Sounds like its most likely for your evap purge, and normally goes to the charcoal canister that's down by the rack, if none of that's there, just plug it off with a vacuum cap if its open, if its open its a vacuum leak.... wich you dont want :thumb:
User avatar

By blk92hb
- Wed Apr 13, 2011 1:41 am #250083 can you get a better pic because if its the rear right vac line it could be the map. The vac line on the tb go to the evap
User avatar

By That One Dude
- Wed Apr 13, 2011 1:51 am #250084 MAP sensor is on the throttle body. It's probably the evap purge valve.
User avatar

By That One Dude
- Wed Apr 13, 2011 1:56 am #250087 It's cool. You were on the right direction for some D-series engines having the MAP sensor mounted on the firewall.
User avatar

By Jnafronn
- Wed Apr 13, 2011 6:00 am #250130
forcefedEG wrote:Sounds like its most likely for your evap purge, and normally goes to the charcoal canister that's down by the rack, if none of that's there, just plug it off with a vacuum cap if its open, if its open its a vacuum leak.... wich you dont want :thumb:

thanks broo!!! :thumb: :thumb: :woot: :woot:
User avatar

By forcefedEG
- Wed Apr 13, 2011 6:30 pm #250220
Jnafronn wrote:
forcefedEG wrote:Sounds like its most likely for your evap purge, and normally goes to the charcoal canister that's down by the rack, if none of that's there, just plug it off with a vacuum cap if its open, if its open its a vacuum leak.... wich you dont want :thumb:

thanks broo!!! :thumb: :thumb: :woot: :woot:


No problem :thumb:
 Reply
Return to B Series