Vacum lines
Posted: Tue Apr 12, 2011 4:30 amI Have dont know were all my vacuums go theres one missing on the back right side of the intake and when i put my finger on it! it idles lower
any helf.?
any helf.?
Page 1 of 1
Posted: Tue Apr 12, 2011 4:30 amPosted: Wed Apr 13, 2011 12:50 amSounds like its most likely for your evap purge, and normally goes to the charcoal canister that's down by the rack, if none of that's there, just plug it off with a vacuum cap if its open, if its open its a vacuum leak.... wich you dont want
Posted: Wed Apr 13, 2011 1:41 amcan you get a better pic because if its the rear right vac line it could be the map. The vac line on the tb go to the evap
Posted: Wed Apr 13, 2011 1:51 amMAP sensor is on the throttle body. It's probably the evap purge valve.
Posted: Wed Apr 13, 2011 1:53 amoh. sorry for the misleading.
Posted: Wed Apr 13, 2011 1:56 amIt's cool. You were on the right direction for some D-series engines having the MAP sensor mounted on the firewall.
Posted: Wed Apr 13, 2011 6:00 amforcefedEG wrote:Sounds like its most likely for your evap purge, and normally goes to the charcoal canister that's down by the rack, if none of that's there, just plug it off with a vacuum cap if its open, if its open its a vacuum leak.... wich you dont want
thanks broo!!!
Posted: Wed Apr 13, 2011 6:30 pmJnafronn wrote:forcefedEG wrote:Sounds like its most likely for your evap purge, and normally goes to the charcoal canister that's down by the rack, if none of that's there, just plug it off with a vacuum cap if its open, if its open its a vacuum leak.... wich you dont want
thanks broo!!!
No problem