Oil pan
Posted: Wed Aug 24, 2011 1:47 amI need a new oil pan. I have a B16A. Can I use any B-series VTEC/non VTEC oil pan?
Page 1 of 1
Posted: Wed Aug 24, 2011 1:47 amPosted: Wed Aug 24, 2011 1:59 amyup
Posted: Mon Aug 29, 2011 5:55 pmActually B16, LS and B20's use the same oil pans. GSR's and Type R's use a different one because they have crank girdles. Also a GSR pan will be stamped P72, not sure if the others will have any stamping on them.
So, in short you need one for a nonVTEC LS or B20 or from another B16.
So, in short you need one for a nonVTEC LS or B20 or from another B16.
Posted: Mon Aug 29, 2011 6:22 pmbks84 wrote:Actually B16, LS and B20's use the same oil pans. GSR's and Type R's use a different one because they have crank girdles. Also a GSR pan will be stamped P72, not sure if the others will have any stamping on them.
So, in short you need one for a nonVTEC LS or B20 or from another B16.
X2 He is 100% right
the gsr and itr have a p72 stamp the others have nothing so you know what to look for
Posted: Tue Aug 30, 2011 6:22 pmThe bolt patterns and such are the same between all the B-series oil pans, but the GSR and ITR pans are a little deeper right where the pan starts to slope down to the sump to accommodate for the main cap girdle.