Civic EG

Posted: **Wed Aug 24, 2011 6:33 pm**

im interested in doin a dohc vtec swap in my ej1 with a d16z6. what stuff can i re-use to do the swap?

Posted: **Wed Aug 24, 2011 6:35 pm**

Motor mounts and wire harness sir.

Posted: **Wed Aug 24, 2011 6:47 pm**

so i can reuse the d16z6 motor mounts and wireharness on a dohc vtec? what about shift linkage or cv axles?[/quote]

Posted: **Wed Aug 24, 2011 7:12 pm**

When we did my swap we had to replace axels and shirt linkage. I also bought motor mounts and found out i didnt need them and got my money back

Posted: **Wed Aug 24, 2011 7:13 pm**

You will have to get a t bracket and the bottom bracket for the tranny

Posted: **Wed Aug 24, 2011 11:35 pm**

whats the t bracket and bottom one look like

Posted: **Thu Aug 25, 2011 12:01 am**

just curiuos do i need to convert to obd1 or obd2....and would my car be an obd1 system or an obd2 system, im not exactly sure

Posted: **Thu Aug 25, 2011 12:35 am**

your car is currently OBD1. I suggest staying OBD1 to save headaches.

Posted: **Thu Aug 25, 2011 10:53 pm**

Yes stay with OBD1 but i sont have a pic of the t bracket butits located on the back of the motor where one of your mounts are.

Posted: **Thu Aug 25, 2011 10:59 pm**

Posted: **Mon Aug 29, 2011 1:33 am**

so basically all i need is cv axles? shift linkage? t bracket? bottom bracket? ecu? and can i use 99-00 civic si axles?

Posted: **Mon Aug 29, 2011 2:21 am**

b16/b18 vtec swap into stock ej1