Oil Pump
Posted: Tue Sep 13, 2011 5:23 pmwhats the max rev limit a stock B16a oil pump can handle?
Page 1 of 1
Posted: Tue Sep 13, 2011 5:23 pmPosted: Tue Sep 13, 2011 8:07 pmsame as a GSR and Type r pump.. Same part number..
Posted: Wed Sep 14, 2011 12:25 pmso if i build an engine that revs higher than the stock limit will the pump be ok
i was told it wouldn't be able
i was told it wouldn't be able
Posted: Wed Sep 14, 2011 2:08 pmnew or used?
Posted: Wed Sep 14, 2011 3:25 pmnew
Posted: Wed Sep 14, 2011 5:07 pmA New oem Honda stock b series vtec oil pump will take most anything you can throw at it , the only oil pump problem I've heard of is stroker engines 90mm+ stroke breaking oil pump gears and that's because of increased harmonics . If in doubt Unorthodox racing makes bullet oil pump gears you can invest in them
Posted: Wed Sep 14, 2011 6:41 pmcool thank for the info dudes 
Posted: Thu Sep 15, 2011 5:30 pmExactly how high do you plan on revving the engine? Will it hold those RPM's for an extended period of time?
If you're building a road race engine, then you might wanna look into a Accusump oiling system (or something like it)
Never heard of Unorthodox making such a part... I just browsed their site and theres nothing on it about oil pump gears. I know Endyn modifies OEM pumps to hanlde the abuse he's talking about and Prodrive make/made gears for B series pumps.
Endyn - http://theoldone.com/components/Oil%20P ... _pumps.htm
Prodrive - http://www.circuitworx.com/products.html
If you're building a road race engine, then you might wanna look into a Accusump oiling system (or something like it)
forcefedEG wrote:A New oem Honda stock b series vtec oil pump will take most anything you can throw at it , the only oil pump problem I've heard of is stroker engines 90mm+ stroke breaking oil pump gears and that's because of increased harmonics . If in doubt Unorthodox racing makes bullet oil pump gears you can invest in them
Never heard of Unorthodox making such a part... I just browsed their site and theres nothing on it about oil pump gears. I know Endyn modifies OEM pumps to hanlde the abuse he's talking about and Prodrive make/made gears for B series pumps.
Endyn - http://theoldone.com/components/Oil%20P ... _pumps.htm
Prodrive - http://www.circuitworx.com/products.html
Posted: Thu Sep 15, 2011 9:40 pmhttp://books.google.com/books?output=ht ... rch_anchor
This is the book my information came from, its in there but the page 183 is restricted . They made them in the mid 90's they may not now though
There is a brief blurb mid page about them
This is the book my information came from, its in there but the page 183 is restricted . They made them in the mid 90's they may not now though
There is a brief blurb mid page about them
Posted: Thu Sep 15, 2011 10:25 pm