Civic EG

Posted: **Tue Jan 22, 2013 8:43 pm**

ok so i have to questions im running my stock eg wire harness on a b18b can i use my d16 o2 sensor and map sensor on a b18b turbo setup ?

Posted: **Tue Jan 22, 2013 9:33 pm**

Yes and Yes but the stock map is only good for reading 11-12 lbs before it throws a CEL.

Posted: **Tue Jan 22, 2013 9:36 pm**

Actually I should have said Yes on the O2 - as long as they are both 4-wire.
(vx D15z1 and manual HX D16y5 came with 5-wire and cx D15b8 came with 1 wire)

Posted: **Tue Jan 22, 2013 9:52 pm**

you can go to xenocron.com and look for the map sensor for running more lbs of boost.

http://www.xenocron.com/hondata-4-bar-m ... 290daf69c0

above is a 4 bar map sensor..

im not a fan of using the gm 3 bar as it looks like garbage in your bay

these guys have a lot of cool toys to buy as far as electronics

Posted: **Wed Jan 23, 2013 4:48 am**

thanks big help and i also does any one have a d16z6 wiring harness diagram or something of the such cause i need to know which plug is my map sensor and which one is my o2 cause last swap i did i used a teg harness i believe

Posted: **Wed Jan 23, 2013 5:45 am**

I'll post one up sheen I get off my tablet and on the laptop friend. :thumb:

Posted: **Wed Jan 23, 2013 5:57 am**

this is for everything and im still looking around my hdd to find the o2 pics

but here

http://6thgearadvertising.com/civic-eg/ ... 1f44a2f464

Posted: **Wed Jan 23, 2013 2:19 pm**

The o2 will have 4 wires, square plug, the map will have 3 wires with a 3-wide pin plug.

o2:

map:

Posted: **Wed Jan 23, 2013 3:57 pm**

thanks so much i wouldnt be running with out you guys

Posted: **Wed Jan 23, 2013 4:09 pm**

madhatchride wrote:thanks so much i wouldnt be running with out you guys

Hope that fixes it... if not, let us know :thumb:

Civic EG

map sensor/02 sensor

map sensor/02 sensor