Page 1 of 1

Built NA B20v into an EG from a Teggy.. question....

PostPosted: Sun Mar 10, 2013 2:19 am
by poorman type-r
So I am going to be buying a '94 Integra with a built B20v here in the next month or so. My question is can I swap everything over into the hatch from the Integra? Axles, shift linkage etc.? It's been a while since I have researched Hondas/Acuras so my memory is a bit faded and I just want to know a parts list of what I will need. So anything you can think of just let me know. Thanks guys.

PostPosted: Sun Mar 10, 2013 3:41 am
by bigpunn421
the civic eg an 94-01 teg are alot alike.

i use all the suspension componets fron integra

PostPosted: Sun Mar 10, 2013 2:31 pm
by Fada Blayne
Everything swaps over :thumb:

PostPosted: Mon Mar 11, 2013 7:09 pm
by poorman type-r
Alright awesome, in a couple months I will have it swapped over completely into the EG. Can't wait to feel the difference between my b8 and this B20v haha.

PostPosted: Tue Mar 12, 2013 1:33 am
by 92civicEGsedan
If everything swaps over does that mean you can use motor and tranny mounts to put a b engine into a civic?

PostPosted: Tue Mar 12, 2013 7:02 am
by Fada Blayne
92civicEGsedan wrote:If everything swaps over does that mean you can use motor and tranny mounts to put a b engine into a civic?


Assuming you know that you have to use the rear t bracket from the integra then yes :thumb:

PostPosted: Tue Mar 12, 2013 5:06 pm
by 92civicEGsedan
Fada Blayne wrote:
92civicEGsedan wrote:If everything swaps over does that mean you can use motor and tranny mounts to put a b engine into a civic?


Assuming you know that you have to use the rear t bracket from the integra then yes :thumb:


Thanks for the info I didn't know they swapped over