I need some help
Posted: Wed Mar 13, 2013 1:08 amWhen I took my b18 apart I didn't mark my cams. my motor is at tdc but I don't know where my cams should be can you guys help me??
Page 1 of 1
Posted: Wed Mar 13, 2013 1:08 amPosted: Thu Mar 14, 2013 1:49 amI didn't mark my cams at tdc so how do I get my head to tdc??
Posted: Thu Mar 14, 2013 2:33 amYou can set the cams in any way you want. the lobes will adjust the valves depending on how you sit the cams in. From there you can adjust your timing. Or just set your cams in so they look exactly like this
Posted: Thu Mar 14, 2013 2:34 amJust be sure that if you have to adjust the timing To remover the Spark plugs and rotate counter clock wise so you aren't turning against compression.
Posted: Thu Mar 14, 2013 2:52 amMy cams won't go in like the pic their off a little. And I don't know how to set the timing
Posted: Thu Mar 14, 2013 2:54 amAre you 100% sure the bottom end is at TDC?
Posted: Thu Mar 14, 2013 3:04 amYes I set it before I put the head on