Toda Vtec killers on B16 Turbo ?
Posted: Thu Apr 10, 2008 4:21 amanybody tried to put TODA Vtec killers on Turbo B ?!
Civic EG
Forum for the Honda Civic EG 1992-1995
http://www.civic-eg.com/forum/
Toda Vtec killers on B16 Turbo ?
Page 1 of 1
Posted: Thu Apr 10, 2008 4:21 amPosted: Thu Apr 10, 2008 4:33 amarnt those More for All motor setups?
Posted: Thu Apr 10, 2008 5:37 amthose cams would probbably have too much lift on intake and exhaust for a mild setup. You also need to run Toda dualsprings to work with the cam. From the specs I see the cams are pretty dead even on lift on intake and exhaust 285/285. Unless you have an equal length manifold to make use of it, I dont see much power increase.
Jeremy from RedZone Performance had some good results with blox type Bs which are 265/265 but he has a top mounted turbo to make use of that cam profile.
Jeremy from RedZone Performance had some good results with blox type Bs which are 265/265 but he has a top mounted turbo to make use of that cam profile.