Flywheel help
Posted: Sat May 03, 2008 6:10 amI am sell ing my b18b and getting a b16a sir2 but the b16 is a long block will my b18b Flywheel work on the b16a 
Page 1 of 1
Posted: Sat May 03, 2008 6:10 amPosted: Sat May 03, 2008 1:40 pmmoved to B series
Posted: Sat May 03, 2008 2:38 pmHELP!!!!!!!!!!!!!! 
Posted: Sat May 03, 2008 4:40 pmJesus Christ this is off topic but you posted this at 1am for members in my time zone.
It's 8 hours later, give it some time. It's a Saturday, people go out, you may have to wait a day or two to get the most correct answer.
It's 8 hours later, give it some time. It's a Saturday, people go out, you may have to wait a day or two to get the most correct answer.
Posted: Sat May 03, 2008 6:04 pm
I need help asapPosted: Wed May 07, 2008 5:55 pmno wont fit, clutches are different, so the bolt patern on the flywheel is different too
at least...that's what i thought...
at least...that's what i thought...
Posted: Sun Jun 01, 2008 5:03 pmIt will fit, all B series flywheels are interchangable.
Posted: Mon Jul 28, 2008 1:03 pmb16a2vtiguy wrote:It will fit, all B series flywheels are interchangable.
but im just a piece of advice if you didnt know the cable clutches and hydro clutches are very different they will not work with each other.
Posted: Thu Jul 31, 2008 9:38 amb16a2vtiguy wrote:It will fit, all B series flywheels are interchangable.
yes all B series parts are interchangeable. ie I was able to use the starter off my B16A to help troubleshoot my boys LS integra