Page 1 of 1
B18a1 or b18b1?
Posted:
Sat Feb 14, 2009 11:39 pmby hatchin06
K guys quick question. I have an b18b1 head and all the internals for a b18b1 block but I don't actually have the block lol. A guy here offered me a b18a1 block for free and I was wondering should I just find a b18b1 block or take the free a1? Also, Isn't the A1 obd0? What would I need to make it work if its not plug and play? thanks guys as always
Posted:
Sun Feb 15, 2009 12:00 amby hondajunkee
not 100% but i think the blocks will be the same just the head is different, but again not 100%
Posted:
Sun Feb 15, 2009 2:29 amby doitpropa
i believe only diff in the to motors are the b1 head has a little more aggresive cams .put that w/ the rite ecu nd u'll get 10 more hp .. u can use the a1 block w/ b1 head nd have no probs.
sounds like a good deal free block jus make sure its not stolen
Posted:
Sun Feb 15, 2009 2:31 amby Greasedmonkey
one is obd1 and the other is obd0. if you are putting this in an EG get the b1. its a plug and play swap. Also the B1 comes with a hydro tranny. The b1 also has the right plugs to plug into your car.
Posted:
Sun Feb 15, 2009 3:16 amby chrono404
Not all B18b1's are OBD1, I have a 01 Integra with a B18b1, Its OBD2.
Posted:
Sun Feb 15, 2009 3:30 amby hondajunkee
90-91 B18A1 = OBD0
92-93 B18A1 = OBD1
94-95 B18B1 = OBD1
96-01 B18b1 = OBD2
Posted:
Sun Feb 15, 2009 8:52 pmby hatchin06
It's a 92 so that means its all plug and play?
Posted:
Sun Feb 15, 2009 9:21 pmby Greasedmonkey
it will still have a cable tranny. it will also make less power, though not my much. forgot about the 92-93 tegs...
For a complete plug and play grab a B18b1.