Page 1 of 1

B18B Frustrations.....

PostPosted: Wed Feb 18, 2009 11:45 pm
by JDMcivic92
Ok I have a B18B, 0bd 2.

What year integra is this out of, Im so frustrated. If someone could help me that would be great! :?

PostPosted: Wed Feb 18, 2009 11:49 pm
by Faded_Milano
95<

PostPosted: Wed Feb 18, 2009 11:52 pm
by JDMcivic92
Faded_Milano wrote:95<


Is that for the JDM version, because I have the JDM version not the USDM version.

PostPosted: Thu Feb 19, 2009 12:37 am
by Classiccarsrule85
yea same if we went obd2in 95/96 japan sure did as well....

PostPosted: Thu Feb 19, 2009 1:20 am
by Greasedmonkey
what is the point of this thread? Please tell me or this will be deleted.

PostPosted: Thu Feb 19, 2009 1:40 am
by Classiccarsrule85
well he dosent know if its really a obd1 or obd2 b18b motor

PostPosted: Thu Feb 19, 2009 3:03 am
by JDMcivic92
Greasedmonkey wrote:what is the point of this thread? Please tell me or this will be deleted.


It had the GSR swap in it but they blew the motor which runs w/ obd2 so I dont know if they were just lazy and didnt replace the ecu when putting the new motor in or if its suppose to have the obd2

PostPosted: Thu Feb 19, 2009 9:15 am
by jmsplitfyre
Aren't B18B1's obd1?

PostPosted: Thu Feb 19, 2009 1:03 pm
by Greasedmonkey
Not all b1's are obd1, the 96 and up are obd2. If you have a 92-95 civic, you would want to run obd1 just to make things easier. You can tell if its obd1 or 2 pretty easily by looking at the plugs on the distributor. they each use a different style plug.

PostPosted: Thu Feb 19, 2009 8:14 pm
by jmsplitfyre
So basically, the OPs b18b came from 96+ Integra. Good to know, thanks greasedmonkey! :thumb:

So if I'm going for a b18b, I'm gonna look for those ones in a 94 or 95 Integra.

PostPosted: Fri Feb 20, 2009 2:09 am
by Greasedmonkey
jmsplitfyre wrote:So basically, the OPs b18b came from 96+ Integra. Good to know, thanks greasedmonkey! :thumb:

So if I'm going for a b18b, I'm gonna look for those ones in a 94 or 95 Integra.


Yep.