Civic-EG.com Forum 3.3.1

- Mon Mar 02, 2009 8:53 pm #99984 Well I was looking at exhausts to put onto my project car when I get it out of the shop from being painted, and was wondering if there would be room for a header after I put a b18b in the engine bay.

- Mon Mar 02, 2009 9:35 pm #99993 well not exactly sure what your asking, are you try to see if you'll be able to fit an aftermarket header on your civic with a b18 in it? if that's the question then of course you can without a problem

- Mon Mar 02, 2009 9:55 pm #99994 yup

EZ MotorSports
Revin... any guesses on the orgin of the nickname

- Tue Mar 03, 2009 2:56 am #100049 Without any fabrication?

[chrono404]

- Tue Mar 03, 2009 8:23 am #100102 Possibly on one for a 90-93 Integra. However if you get a 94-01 Integra Header(or aftermarket replacement) it will bolt up with out issue.

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Tue Mar 03, 2009 9:52 am #100106 Okay, this may sound really stupid, I've never done a swap before, but when I get the other engine in, do I get a header/exhaust from the year of my car now or from the year/make of the engine?

[chrono404]

- Wed Mar 04, 2009 7:20 am #100453 any header for a 94-01 integra will work on your car with a B Series swap.

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Wed Mar 04, 2009 5:59 pm #100551 you will have plenty of room...check it. You will get a header for a B series motor. 99-00 civic Si header will work and reportedly mate up with the exhaust.

header



stock

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Thu Mar 05, 2009 3:09 am #100720 Okay, thanks a lot guys. So when I get an exhaust, do I need to search '92 civic exhaust' or 'integra exhaust'?

- Thu Mar 05, 2009 3:20 am #100725 why not go to an exhaust shop and have the make you one?

[chrono404]

- Thu Mar 05, 2009 3:26 am #100728 if you where going to buy an exhaust system online, It would be for your car. I.e if you have a 92 Civic hatch you would want to by exhaust for a 92 Civic hatch, if your rocking a Coupe or Sedan then you would get the exhaust for that model.

You could also have an Exhaust shop make your pipe for you.

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Thu Mar 05, 2009 4:09 am #100742 you get the exhaust for the car. You will have to get it modified though.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Thu Mar 05, 2009 5:51 am #100773 I don't know about any place that makes exhausts, especially mandrel bent ones.

Now on for the parts like oil/water pump. With things like that, what year would I need to look up since I'll be using a b20 bottom end and a vtec head that will probably be of different years?

- Thu Mar 05, 2009 5:57 am #100776 ok, my 92 EG has a H22A1 in it and I have no issues, although, you can always do the DYI hood raise.

- Thu Mar 05, 2009 5:27 pm #100863

I don't know about any place that makes exhausts, especially mandrel bent ones.

Now on for the parts like oil/water pump. With things like that, what year would I need to look up since I'll be using a b20 bottom end and a vtec head that will probably be of different years?

obd1 parts. you would get the water pump and oil pump for a GSR/ITR as well as a timing belt from those cars.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300