Civic-EG.com Forum 3.3.1

- Sat Aug 15, 2009 8:29 am #138028 Hi everyone,

just 2 questions!

i haveb a d15b2 engine in my civic 92 hatch

1: could i install proper fuel injection to this? injector for each cylinder? (sorry im new to this so dont know proper terminology) what would i need and where from?

2: just before the throttle body u have the chamber at the end of the intake pipe, with sumthing like "pgmfi" written on it, i took this lid of and there was a plate a few inches from the intake hole which looked like it was restricting air flow, any harm in taking this out???


cheers in advance

Rikki

[teal_dx]

- Sat Aug 15, 2009 1:00 pm #138036 Hi, welcome to the site.
You are referring to a DPFI dual port fuel injection to MPFI multi port fuel injection swap. Yes it is a common swap, try doing a search on here for those terms. A few members have done the swap.
I'm not sure about this plate... can you post a pic?

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Sun Aug 16, 2009 9:11 am #138130 Hi, thanks for the reply i will search for it!

I will post up a picture soon!

As for the conversion, would it increase bhp? as i wud be adding more fuel to the cylinders! kinda answered my own question there lol its probably a yes!

Cheers, and this seems to be the best forum for eg civics on the net! credit to the design! its awesome!

- Sun Aug 16, 2009 12:53 pm #138132 the plate, sounds like your throttle valve, you need that

- Sun Aug 16, 2009 5:13 pm #138152 its not the butterfly, its a brass coloured plate right infront of the intake pipe entrance. iv taken it out and so far the car is running ok!