Civic-EG.com Forum 3.3.1

- Sun Nov 08, 2009 3:00 am #155369 will a 5 speed z6 intake be ok on an auto? or will i have to change something?

- Sun Nov 08, 2009 8:10 am #155392 It should.

- Sun Nov 08, 2009 11:31 am #155409 I would check on whether you need to change from a 3 wire IACV to fit an auto, which i think uses a 4 wire IACV. dont know for sure though.

::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!

[suspendedHatch]

- Sun Nov 08, 2009 7:05 pm #155439

I would check on whether you need to change from a 3 wire IACV to fit an auto, which i think uses a 4 wire IACV. dont know for sure though.

Thats on the EK. EG doesn't have this issue.

The intake manifolds are the same. The throttle bodies are different between auto and manual.

- Mon Nov 09, 2009 2:45 am #155497 so i will be ok to just swap the throttlebodys?

- Mon Nov 09, 2009 3:19 am #155504

so i will be ok to just swap the throttlebodys?

yepperz throttle bodies like suspendedhatch said are the only difference on our egs...

1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1

- Mon Nov 09, 2009 4:16 am #155528 thanks again guys, civic-eg in my opinion is the best for info!! you guys all rock