headgasket question

D15, D16, D17 and Mini-Me swaps
 Reply
User avatar

headgasket question

By d4rk13l4de
- Tue Nov 10, 2009 12:45 am #155712 i just ordered a headgasket online and the one they sent me is for a d15z6 i ordered one for a d16z6 will it work or do i have to send it back?
User avatar

By Dippin_EG
- Tue Nov 10, 2009 12:49 am #155714 Im assuming you have a D15B7?

If so, it should work fine. i cant see it being an issue

Its like putting a GSR headgasket for an LS/VTEC
B to B
D to D
H to H

Someone correct me if im wrong
User avatar

By d4rk13l4de
- Tue Nov 10, 2009 2:05 am #155734 originaly i had a d15b7 but i am in the process of putting a d16z6 in it.
User avatar

By Dippin_EG
- Tue Nov 10, 2009 2:15 am #155737 so, i misread your original post, they sent you the gasket for a D15Z6 (european)?

If so, it will be the same. Im pretty sure all D headgaskets are the same.
User avatar

By d4rk13l4de
- Tue Nov 10, 2009 2:18 am #155739 sweet, i checked the par numbers and there is a difference thats why i was asking
User avatar

By Dippin_EG
- Tue Nov 10, 2009 2:22 am #155742 well. I'd wait for someone else to chime in. Im not 100% sure on this one. though im pretty syure they're all the same. and if no one else posts, im right. :thumb:
User avatar

By JUICE
- Tue Nov 10, 2009 3:20 am #155752 i'm pretty sure that the only difference is material. some fiber, some layered metal. go with layered metal one. not 100% on fitment between D15/16 though...
User avatar

By d4rk13l4de
- Tue Nov 10, 2009 6:09 am #155776 its a mls headgasket
the company i got it from said its the same so if it doesnt work they WILL SEND ME A NEW ONE lol
User avatar

By d-mon
- Tue Nov 10, 2009 3:43 pm #155821 d15 and d16 both have 75mm bore
head gasket will be fine.
 Reply
Return to D Series