B16, B18, B20
User avatar
By Ajax1989
#186893 Yes you do

what it does is the gas fumes from the tank get drawn in the canister, and the purge solenoid take the fumes and reinters it into the motor

you will lose gas mileage if you take it off, and if you live where you have to smog your car you will FAIL the visual and the actual smog test, you will have high HC reading
User avatar
By Classiccarsrule85
#186965 couldnt you get creative and make something a bit better ??? or would it not work the same....
User avatar
By teal_dx
#186967
94_jdm_ferio wrote:Yes you do

what it does is the gas fumes from the tank get drawn in the canister, and the purge solenoid take the fumes and reinters it into the motor

you will lose gas mileage if you take it off, and if you live where you have to smog your car you will FAIL the visual and the actual smog test, you will have high HC reading


Also you'll smell gas fumes inside your car sometimes.
User avatar
By suspendedHatch
#186996 Fumes = CO = brain damage and/or carbon monoxide poisoning. When CO enters your bloodstream, it never leaves until the actual blood cells carrying the CO die. As long as your blood cells are carrying CO they can't carry oxygen. The only other way to get CO out of your blood is to live under an oxygen tent for several months.

I never understood why someone would think of removing stuff from the engine bay. If you want your engine bay to look like a 1950's Chevy, maybe Honda isn't for you.
User avatar
By {ikon}EM1
#186997 The only reason y I ask is cus I just removed the cruze controll and a vacume line was conected to it from the evap... its not out of the car just yet I just need to know if I can reroute the vac to something else that way I will not loose out on stuff...
User avatar
By {ikon}EM1
#187023 So I went to the auto parts store and bought a breather and a small to large pvc connector... so that way I will still run the evap.. but instead of running it to the cruze controll its running to the lil breather...
User avatar
By ikon
#187056
{ikon}EM1 wrote:So I went to the auto parts store and bought a breather and a small to large pvc connector... so that way I will still run the evap.. but instead of running it to the cruze controll its running to the lil breather...


civic status..... my man :D
User avatar
By chrono404
#187069
suspendedHatch wrote:I never understood why someone would think of removing stuff from the engine bay. If you want your engine bay to look like a 1950's Chevy, maybe Honda isn't for you.


x2

I am also not a fan of shaved bays.

Good info on the Carbon Monoxide.
User avatar
By Classiccarsrule85
#187072 indeed shaved bays :thumbdown: i like being able to get to things and make sure things are working properly and you really cant do that when the parts you need to get to are all underneath your dash and other things.....i build if i was a race mechanic / driver making things easier to get to =fun for everyone....
User avatar
By teal_dx
#187076
suspendedHatch wrote:I never understood why someone would think of removing stuff from the engine bay. If you want your engine bay to look like a 1950's Chevy, maybe Honda isn't for you.

This would make a good topic for a new thread :wink:
User avatar
By {ikon}EM1
#187104
suspendedHatch wrote:I never understood why someone would think of removing stuff from the engine bay. If you want your engine bay to look like a 1950's Chevy, maybe Honda isn't for you.


I'm not going for that look dude... the reason y I took it out is cus I no longer need it/ use it...so its useless in my engine bay... I changed out my steering wheel... meaning I can no longer activate the cruzecontroll... and sooooo what if I take stuff out of my bay!!! Its my car!!! Worry bout ur shit and ill worry bout mine... ill refund u all ur money that you've Invested on my car when that day comes... till then shut up and voice ur opinion somewhere else...