is this mini me swap possible?

D15, D16, D17 and Mini-Me swaps
 Reply
User avatar

By 95egcivic
- Thu Apr 15, 2010 6:46 pm #187957 it should fit but still gonna have torque of a dx...check out the diy

By mregcivic
- Thu Apr 15, 2010 6:53 pm #187965 cause right now i have a 95 eg lx sedan that has a d15b7 as we speak.
User avatar

By 95egcivic
- Thu Apr 15, 2010 6:59 pm #187966 it should fit

By mregcivic
- Thu Apr 15, 2010 7:02 pm #187971 ok thanks. now since im driving with a non-vtec that means i gotta get a comuter p28 ecu? cause i know i cant just drop it in i need the vtec solenoid and???
User avatar

By 95egcivic
- Thu Apr 15, 2010 7:05 pm #187974 i dont know what all is needed...put i do know that u can wire the seliond to ur ecu i think....

By AutoXCivic
- Thu Apr 15, 2010 7:16 pm #187978 Yes it fits, and it gives you about a 50% gain in hp and tq all through the power band. You need the z6 head (obviously) p28 ecu, z6 dizzy, vtec solenoid (which may or may not be on the head already), and you might as well use the z6 IM it flows better than the z6 anyway.

I currently have this set up and the car went from about 80whp/wtq to about 120whp/wtq. It's a massive improvement over the d15b7, you should also look into getting the EX/Si transmission it will also increase the fun factor of the car.

By mregcivic
- Thu Apr 15, 2010 7:22 pm #187984 awesome man thanks. but what did u mean by z6 im better flow than the z6?

By Wicked Customs
- Thu Apr 15, 2010 7:40 pm #187998 Think he meant to say a y8 intake mani. the y8 is the best flowing intake mani

By mregcivic
- Thu Apr 15, 2010 7:48 pm #188004 what kind of headers should i use????
User avatar

By 95egcivic
- Thu Apr 15, 2010 9:07 pm #188025 if u can afford them...dc headers....and just a heads up i didnt mean 2 offend u if i did with the afford part

By AutoXCivic
- Thu Apr 15, 2010 11:06 pm #188046
Wicked Customs wrote:Think he meant to say a y8 intake mani. the y8 is the best flowing intake mani


Nah I meant z6 ... I meant it flows better than the b7. And you might be able to pick one up with the head too.

By AutoXCivic
- Thu Apr 15, 2010 11:09 pm #188047
mregcivic wrote:what kind of headers should i use????



Bisimoto ... J/K ... for a street car those are over kill and they are really pricey. DC headers are nice, or edelbrock, you can realistically get away with the ebay no name headers, that's what I've been running for 3+ years and no problems yet. Any equal length header is going to flow way better than your stock exhaust manifold.
 Reply
Return to D Series