- Fri Apr 16, 2010 11:11 am
#188129
Hi there, im from Wales in the UK......thought i should say that as members on here seem mostly from across the pond in the US of the big A 
Anyway, im Rhys, im 20 years old and im currently trying to build up 2 cars, which is a pretty mammouth task to be honest, ive got a 1994 Civic EG4 VEi and a '91 CRX ED9, their both my pride and joy.
First up my Civic EG4..........
1994 Civic EG4 VEi
JDM Black Interior plastics + Black Cloth seats (rare)
Phat 5's in white with red out lip + Yokohama A539's
Avo fully adjustable track spec. coilovers
Spoon Sports CF duckbill spoiler
Carbon Fibre lower boot (trunk)
Limo tinted rear windows and Dark tinted front side windows
Team Heko smoked wind deflectors
Clear corners (amber at night, constant amber lighting)
JDM rear tail lights
EBC Drilled, Vented and Grooved front discs
EBC Fast Road pads
Braided brake lines front and rear
Custom front mounted stainless CAI with Green Cotton cone filter
AEM fuel rail (not fitted it yet)
JDM Billion radiator cap
Funkypower short shift
Skunk2 Billet gearknob (not fitted yet)
FLi s.w.a.t 5 MP3 headunit
Now for my main project......
Alot of the parts bellow i have either got here or on order/hold for this build, some items may change, but this is it mainly...
'91 CRX ED9 - UKDM
D16a9 (ZC) DOHC
15x6.5 Rays Volk TE37's in bronze + Toyo T1R's
HKS ZC 265degree cam's
Ti dual valve springs
Ti retainers
Supertech racing valve stem seals
Forged High Comp. pistons
Forged Eagle con rods
Lightened, Balanced & knife edged crankshaft
ACL race bearings
ARP bolts, studs and washers throughout
Juran radiator cap
AEM fuel rail
Purple rocker cover
Buddy Club Spec II exhaust system for road
Custom silenced straight exit system for track (have plans to make this)
Tegiwa adjustable de-cat
Jazz Motorsports Fuel cell
Aeromotive/Earl's internal fuel setup x2 filters, racing pump, braided line...etc
Wilwood Dynalite 4pot Calipers and 300mm superlite wavy cut floating dics
Do-Luck braided lines
D2 Coilovers
FEEL's rear camber adjusters
ASR rear subframe setup
Juran front and rear top strut braces
Cusco lower brace
uprated front and rear ARB's
I will then be buying a J's racing Carbon GT wing and J's racing front and rear fenders and i may go for a J's racing Carbon fibre bonnet in the future, but we all know how much these cost, that little lot alone is going to be £3000+ and i dont have that sort of money just yet any way.
It will also be fitted with a Carbon Fibre rear diffuser at some point once the builds more further advanced.
Paint wise it will be a Black Metallic (non standard) and a Candy purple/pink engine bay, the theme is Black/Purple/Pink to stand out as these colours work VERY well in my opinion.
Here's 2 pics before i took it off the road for the build.......
Any way let me know what you guys think.
I wont upload pics of the CRX untill its finished as its in a real state at the moment in the garage and the strip down hasn't barely started yet as ive been far too lazy lately.
Cheers,
Rhys
Anyway, im Rhys, im 20 years old and im currently trying to build up 2 cars, which is a pretty mammouth task to be honest, ive got a 1994 Civic EG4 VEi and a '91 CRX ED9, their both my pride and joy.
First up my Civic EG4..........
1994 Civic EG4 VEi
JDM Black Interior plastics + Black Cloth seats (rare)
Phat 5's in white with red out lip + Yokohama A539's
Avo fully adjustable track spec. coilovers
Spoon Sports CF duckbill spoiler
Carbon Fibre lower boot (trunk)
Limo tinted rear windows and Dark tinted front side windows
Team Heko smoked wind deflectors
Clear corners (amber at night, constant amber lighting)
JDM rear tail lights
EBC Drilled, Vented and Grooved front discs
EBC Fast Road pads
Braided brake lines front and rear
Custom front mounted stainless CAI with Green Cotton cone filter
AEM fuel rail (not fitted it yet)
JDM Billion radiator cap
Funkypower short shift
Skunk2 Billet gearknob (not fitted yet)
FLi s.w.a.t 5 MP3 headunit
Now for my main project......
Alot of the parts bellow i have either got here or on order/hold for this build, some items may change, but this is it mainly...
'91 CRX ED9 - UKDM
D16a9 (ZC) DOHC
15x6.5 Rays Volk TE37's in bronze + Toyo T1R's
HKS ZC 265degree cam's
Ti dual valve springs
Ti retainers
Supertech racing valve stem seals
Forged High Comp. pistons
Forged Eagle con rods
Lightened, Balanced & knife edged crankshaft
ACL race bearings
ARP bolts, studs and washers throughout
Juran radiator cap
AEM fuel rail
Purple rocker cover
Buddy Club Spec II exhaust system for road
Custom silenced straight exit system for track (have plans to make this)
Tegiwa adjustable de-cat
Jazz Motorsports Fuel cell
Aeromotive/Earl's internal fuel setup x2 filters, racing pump, braided line...etc
Wilwood Dynalite 4pot Calipers and 300mm superlite wavy cut floating dics
Do-Luck braided lines
D2 Coilovers
FEEL's rear camber adjusters
ASR rear subframe setup
Juran front and rear top strut braces
Cusco lower brace
uprated front and rear ARB's
I will then be buying a J's racing Carbon GT wing and J's racing front and rear fenders and i may go for a J's racing Carbon fibre bonnet in the future, but we all know how much these cost, that little lot alone is going to be £3000+ and i dont have that sort of money just yet any way.
It will also be fitted with a Carbon Fibre rear diffuser at some point once the builds more further advanced.
Paint wise it will be a Black Metallic (non standard) and a Candy purple/pink engine bay, the theme is Black/Purple/Pink to stand out as these colours work VERY well in my opinion.
Here's 2 pics before i took it off the road for the build.......
Any way let me know what you guys think.
I wont upload pics of the CRX untill its finished as its in a real state at the moment in the garage and the strip down hasn't barely started yet as ive been far too lazy lately.
Cheers,
Rhys
JDM '94 Civic EG4 - Captiva Blue Pearl
'91 CRX UKDM ED9 - Black - 200+bhp Track project
'91 CRX UKDM ED9 - Black - 200+bhp Track project
its a nightmare.
