Civic-EG.com Forum 3.3.1

- Thu May 06, 2010 2:17 am #192029 Now Ive got another problem, when im sitting at a stop my tempareture gauge inside the car raises + I dont hear or feel the Cooling Fan kick on........ I popped the hood after i shut the car off and checked the 15amp fuse in the Engine Bay Fuse Box, it isnt blown.... My only other guess would be a bad Cooling Fan Relay....

P.S- While I was swapping out my REAR Motor Mount I noticed that there was a wire that bolted to my Chasis, so I then looked at the plug on the back of the Radiater Fan & it looks like maybe the previous owner spliced into it because there was black electrical tape peeling up.... Also the switch inside the car to turn the a/c or heat on doesnt come on at all & my power mirrors will not work either.... Does anyone have a layout big enough that I can print out so I can check all of my fuses or can you list a layout of the fuse diagram for me....?

Has anyone had this issue before & how do I need to go about fixing this problem....

- Thu May 06, 2010 5:54 am #192080 It could be your Coolant Temp senor that went bad. Try unplugging the connector and jump it by using a Paper clip.

You will need to shape the paper clip into a U and stick each end into the harness and see if the fan jumps.

[suspendedHatch]

- Thu May 06, 2010 3:01 pm #192131 Put power directly to the power side of the fan relay and see if the fan works.

The fuses are all listed on the under side of the fuse covers. First check that. Then if you're willing to buy a multimeter and learn to use it I can go into more detail from there. But in my experience it has been a waste of time because most people just give up.

You can download the Helms manual from hondahookup. It has all the wiring diagrams and troubleshooting flowcharts.

- Thu May 06, 2010 4:44 pm #192145 ive got to check my fuses on the underside of my dash inside because I believe my #13 fuse port was replaced with a block off fuse by mistake (made by me) the other day.... It controls everuthing that is not working on my car.... So i am hoping thats the problem.... Will update everyone when i find out what it is....

- Sun May 09, 2010 7:45 pm #192726 Fixed.... I misplaced the FUSE for it.... It controls exactly what wasnt working.... Stupid Me, lol....