Civic-EG.com Forum 3.3.1

- Sat May 15, 2010 5:00 am #194372 ok i just bought a b18b1 swap and looking on here i see people saying to use your stock d series hrness not the b series harness is this right


and what exhaust mani can i get to fit with out needing welding done that is the only part i dont have

i just bolted the motor in and i need to know what mani to by so i can get it finished and if i have to switch the harness back to the d series harness thanks

- Sat May 15, 2010 5:04 am #194374 Im pretty sure there is a DIY on this. I would check it out, I remember it did have some useful info

- Sat May 15, 2010 5:08 am #194376 i checked the diy section and it did not help the motor is already in i just need to know if im going to have to switch harnesses before i get it all back together and i need to know what exhaust mani to buy

- Sat May 15, 2010 5:11 am #194377 any B series header will work. I

600whp Turbo 84mm LS/Vtec Drag Hatch

- Sat May 15, 2010 5:14 am #194379 so does that mean any aftermarket or oem mani because i have a stock mani but its missing the bottom piece that connect to the rest of the exhaust

- Sat May 15, 2010 5:19 am #194382 well, you either need to get that piece or buy a complete aftermarket one.


mine was listed for a ITR... but bolts perfectly to my LS cause they're all the same

600whp Turbo 84mm LS/Vtec Drag Hatch

- Sat May 15, 2010 5:24 am #194384 ok cool thanks for the quick replys do you know about the wire harnesses

[Ajax1989]

- Sat May 15, 2010 6:24 am #194388 egsedanguy swapped in a b18(ls) and he siad the harness was plug n play, no cuttin or adding

- Sat May 15, 2010 6:16 pm #194457 ok thanks ive got it all done but i still need a exhaust mani or headers ive heard that the stock mani from a 2000 civci si would fit with no modification is this true or will the stock integra setup fit

- Sat May 15, 2010 8:22 pm #194472 As far as I know, there's no way to avoid having to weld the exhaust to fit properly, but I'm not 100% certain.

Hi, I'm John. I'm a hacky sackin', rock climbin', scuba divin', aircraft mechanic.