Civic-EG.com Forum 3.3.1

- Sat May 22, 2010 12:35 am #196080 Ok so i have a B18c Type r, and im looking to make over 200+ hp right now its at 173 bone stock. what would be the best option to make it happen?

My Hatch =]

- Sat May 22, 2010 2:30 am #196088 It depends on what you want, n/a or boost. If you want boost then you can do a simple turbo kit with a good tune will get you 200+. N/a you will need i/h/e stage 2 cam, high comp valves, valves springs, a port&polish and that should get you 200+ good luck

your car is your story, dont let someone else write the book.

91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348

- Sat May 22, 2010 7:37 pm #196185 Its been done and noted, that with a good header, a good intake and good tune, you can make 200+ out of a stock ITR. You will not need cams.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Sat May 22, 2010 9:50 pm #196208 Well i was looking into a bisimoto header, but what one of the ones that has been used, im not trying to copy someone just trying to achieve my dreammms. =]

My Hatch =]

[ChicagoMike]

- Sat May 22, 2010 10:16 pm #196209 I hit 196whp with my old ITR swap. Did it with Skunk2 Stage2 cams, DTR/SSR header, and a killer tune.

------> ALL MOTOR <------
♫ d(-.-)b TRANCE d(-.-)b ♫

- Mon May 24, 2010 6:48 pm #196521 Thats the thing down here in Alabama there isnt too many tuners, or at least in north Bama. =[. but im for sure gonna get at LEAST 200WHP thats my goal. the whole reason i got a B18c Type R. But So some people can get 200 out of a STOCK b18c R thats impressive, and thanks for the feedback Peeps.

My Hatch =]

- Mon May 24, 2010 9:46 pm #196561

Well i was looking into a bisimoto header, but what one of the ones that has been used, im not trying to copy someone just trying to achieve my dreammms. =]

If you are looking at one of our headers, I would recommend picking up a new one. Since our headers are custom built to suit the set-up they are going on, it would be best to pick up one that is built to support your mods and reach your goals.

www.bisimoto.com

- Fri May 28, 2010 12:06 am #197294

If you are looking at one of our headers, I would recommend picking up a new one. Since our headers are custom built to suit the set-up they are going on, it would be best to pick up one that is built to support your mods and reach your goals.

i do plan on picking one up if i ever get enough $$ for it. one of thoes headers is like a dream of mine=p

My Hatch =]