D15, D16, D17 and Mini-Me swaps
User avatar
By CaliEJ2
#204442 when i got my z6 it came with a broken PSV, the part where u put the hose wasnt there. I needed to get my car smogged asap so what i did is i put a small screw then put the hose over it :P . the car passed smog but will this cause the motor to bog or not run right? Im not getting a CEL for it.
User avatar
By Ajax1989
#204444 you will see a lil mpg decrease
User avatar
By suspendedHatch
#204572 Many people report a strong gas odor.

Just grab another one at the junkyard. Pretty much effortless and wont cost you anything. Better than the shame of having something ghetto rigged, right?
User avatar
By CaliEJ2
#204657 ok thanx.... atleast i know thats not the problem with my motor :thumb: ...i went to the junkyard but the cars were stripped. Can i get them from other hondas? accord, prelude?
User avatar
By Torch_Ind
#204673 can you put a picture of what your talking about?
User avatar
By Ajax1989
#204692
Torch_Ind wrote:can you put a picture of what your talking about?


Image
User avatar
By Torch_Ind
#205690 I don't see the broken piece
User avatar
By CaliEJ2
#205695 thats just an example of what im talking about. Not the actual broken PSV. You see that little tube thing sticking out in the middle? Mine is broken off.
User avatar
By Torch_Ind
#205698
CaliEJ2 wrote:thats just an example of what im talking about. Not the actual broken PSV. You see that little tube thing sticking out in the middle? Mine is broken off.


the black vacuum switch with the hose going from it to the intake?
User avatar
By CaliEJ2
#205705 that right there.
Image
User avatar
By Torch_Ind
#205774
CaliEJ2 wrote:that right there.
Image


Ya ok.

I will call my buddy over at Honda in parts and see what it for.

is that the stock motor? and if not what would it have been in so i can ask him.

d16z6 ?
User avatar
By Torch_Ind
#205776 Honda calls it a purge cut solenoid.
other end that broke goes to a charcoal canister?


he says it retails $180 CAD