Civic-EG.com Forum 3.3.1

- Fri Aug 20, 2010 1:39 pm #209786 The bumper moldings came on the bumper.. I had another EG but it got wrecked and i striped it of what i wanted. I had the front bumper with molding but that got destroyed. What third brake light are you taking bout???? I have the foglight in the back taillight.. But anyways the lower console came with a EQ in it so. It looks like they just pulled out the cassette holder. The only problem with it is that the mount that holds the dash up is in the way a little. It pushes the deck out a little or in other words you can't slide it back all the way.. I plan on cutting out some notches so the deck can slide back. Also you will need to extend the Radio wires to reach down there.




Also has anyone every tried to import a car that is not U.S. specs???

- Fri Aug 20, 2010 1:40 pm #209787 The floor mats I think are some store bought, but they might be.

- Fri Aug 20, 2010 4:33 pm #209803 ^ That's what I thought. I've read before that the dash supports are a problem and need a little persuading out of the way.

This is what I mean by the third brake light. Nothing fancy, just every USDM and CDM Civic got one. This is mine from a long time ago (I had just bought the car).


There are JDM ones too with a long LED light (mine is below), as well as an EDM optional one that's also quite similar. (Note also that I retrofit a rear wiper! )



As far as importing a vehicle - I think this is easier for servicemen. You should check with your people.

- Fri Aug 20, 2010 4:46 pm #209807 I was kinda of thinking you were talking about that light. I had one but gave it away. I didn't really like it as much. I am going to talk to some of the people here and see what I need to do to get it back to the states.

- Tue Aug 24, 2010 3:12 pm #210343 Wonder if you could do me a quick favour? Could you measure the total length of your bumper protectors from tip to tip? Down to the closest millimetre if possible.

Thanks in advance ...

EDIT: Can you check the width too?

- Sat Sep 11, 2010 1:58 am #213084 hey i like the black interior, did it come with it? or did u spray it urself??

build thread: viewtopic.php?f=61&t=17304

- Tue Sep 14, 2010 6:31 pm #213656 Welcome. I really like the center council. What car is that from? I was thinking of doing the same thing, looks really nice.

- Wed Sep 15, 2010 5:43 pm #213834

Welcome. I really like the center council. What car is that from? I was thinking of doing the same thing, looks really nice.

Stock EDM

My build Thread
http://civic-eg.com/viewtopic.php?t=14912

- Sat Jan 29, 2011 4:07 pm #236071 Been to Afghanistan and back... Nothing much..

Buddy Club Spec 2 exhaust and Tint and some stickers..

- Sat Jan 29, 2011 4:10 pm #236072 Oh forgot Mud Flaps the best parts....

- Tue Feb 01, 2011 7:45 pm #236499 Nice hatch. Welcome to the site

Carlos
1AAUTO.com
888-844-3393
FREE SHIPPING IN THE LOWER 48 STATES

- Fri Jul 15, 2011 8:55 pm #263708 how about some under the hood pics?!

nice hatch though.

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Sat Jul 16, 2011 4:11 am #263734 If you want to see a stock D16Z6.. But I will post some of the great single slammer.. Plus some other mods...

- Mon Nov 07, 2011 10:41 pm #280625 So updated photos. Still waiting on a motor to come my way..









Will try to get some outside pics. Anyone from North Carolina that can get me hooked up with some sources?????

[Apexracing]

- Mon Nov 07, 2011 11:11 pm #280634 sweet hatch welcome to the best honda forum on the web!!