Civic-EG.com Forum 3.3.1

- Mon Nov 07, 2011 1:51 am #280501 I am about to do the timing belt and water pump/idler. The instructions for the water pump say to use sealant, but it has an oring. Do you guys use sealant on the oring? I only want to do this once. Thanks!

[teal_dx]

- Mon Nov 07, 2011 2:06 am #280503 I have never used any sealant. Just be sure the O ring is in proper place and torque the bolts down.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Nov 07, 2011 3:32 am #280512 X2 as long as there's a gasket you don't need sealant, just make sure all the contact surface is clean and torqe the bolts to spec.

95 civic hatch z6 single slammer!

- Mon Nov 07, 2011 12:03 pm #280533 Thank you very much! Anyone know the book torque? I will borrow a fancy Q wrench today.

- Mon Nov 07, 2011 5:01 pm #280564 Looks like there about 9 ft-lbs according to all data

95 civic hatch z6 single slammer!