- Sun Jan 12, 2014 5:38 pm
#341265
I took a little more pride in my ex coupe though...
I used Krylon on this bad boy. Can't remember the specific color etc though. I bought it at NAPA>
- Fri Feb 28, 2014 8:31 pm
#343116
#tbt with my old, rattled whips.
good lord i was a ricer
good lord i was a ricer
2007 Honda Civic Si
- Fri Feb 28, 2014 9:20 pm
#343118
Haha what happened to the hood on the sedan? Looks like crumpled paper!
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
- Thu Apr 07, 2016 5:03 pm
#358839
Okay - now..
I'm thinking of painting my car - Yup with cans…
just not shire if i should go with a matt finish - wetsand and then wax it ? OR go with a gloss..
just tried some stud with gloss before - and it makes these nasty tiger stripes when painting…
any suggestions ?
AND will 14 x400ml rattle cans be enough for a hatch ? (allover)
thanks
I'm thinking of painting my car - Yup with cans…
just not shire if i should go with a matt finish - wetsand and then wax it ? OR go with a gloss..
just tried some stud with gloss before - and it makes these nasty tiger stripes when painting…
any suggestions ?
AND will 14 x400ml rattle cans be enough for a hatch ? (allover)
thanks
- Sat Apr 09, 2016 7:14 pm
#358848
The tiger stripes are hard to avoid with the narrow spray pattern you get from aerosol cans. Especially with metallic colors. If you plan on a high gloss finish, wet sanding and polishing will get your rattle can paint job looking like a professional job. Some paint covers better than others, but 14 cans will be cutting it close. I think I used about that many and I didn't do the hood or roof. I had 7 or 8 coats though.
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
- Page 4 of 4
- 1
- ,
- 2
- ,
- 3
- ,
- 4