Civic-EG.com Forum 3.3.1

- Tue Sep 02, 2008 12:29 am #67962 Hello,

i was wondering if on a high compression sohc engine,


PORTING the HEAD,IM would help out AT ALL ?

any difference ?


ALSO, what are some thing that will help out in performance in a high CR D16 VTEC motor ?

does a fuel rail,cam gear,high flow gas filter, help out ?

and what is the highest combination to make a D series ?

thanks

- Tue Sep 02, 2008 3:53 am #67991 You will get most of your power from your head work. A good p&p and cam will wake up any motor.

As for what will help out with a high CR motor, an adjustable cam gear, a bigger TB, great headers, and a good intake. The last thing you will need and a Good Tune.

The Fuel rail stock is just fine. You dont need to change that.


Im not sure what you mean by Combination to make a D series.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Wed Sep 03, 2008 12:23 am #68114 what i mean is what HEAD and BLOCK combination is BEST for a NA SOHCm D DRIVER.

i have heard z6 block+head b7 block+z6 head , also i heard a6 block+z6 head ??

- Wed Sep 03, 2008 12:34 am #68117 complete z6 is a good start. From there you can chande the pistons and rods out. Depending on what you consider High CR, you can use OEM honda pistons from different motors to get anywhere from 10-13:1.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Wed Sep 03, 2008 12:50 am #68120 I've heard the D16Z6 block and the JDM D15B head are the best combo. then, go buy a bunch of bisimoto internals

- Wed Sep 03, 2008 12:55 am #68122 d15b and z6 head are the same. its the cam that differs. but that will be changed in an all motor car anyway.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Wed Sep 03, 2008 1:12 am #68124 the best way to make a d faster.. swap it for a b or k.. imo

- Wed Sep 03, 2008 1:57 am #68135

the best way to make a d faster.. swap it for a b or k.. imo

-------

THATS NOT HE POINT, the point is to have D that smokes B,H,K NA ALL MOTOR.

- Wed Sep 03, 2008 1:57 am #68136

d15b and z6 head are the same. its the cam that differs. but that will be changed in an all motor car anyway.

-------------------


Would a D15B cam fit DIRECT into a Z6 head, ? and what would it help out if any ?

- Wed Sep 03, 2008 2:44 am #68150 IM not sure if its a direct fit. I dont see why it wouldnt fit as long as its a vtec cam. Not sure how it will help out a Z6 though.

You might as well just get a real cam for your motor instead of sticking with a stock one.

It will take alot from the D to beat most H or K swapped cars. Little be less to beat B swapped ones. If your goal is to beat those motors then you might want to shy away from All motor and go turbo.


It will cost more and you will not get the same power. But it is also fun to go all motor.

This is an allmotor D build I had planned for mine. Not sure if it will ever happen though now.

http://civic-eg.com/viewtopic.php?t=5184

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Wed Sep 03, 2008 11:55 pm #68283

IM not sure if its a direct fit. I dont see why it wouldnt fit as long as its a vtec cam. Not sure how it will help out a Z6 though.

You might as well just get a real cam for your motor instead of sticking with a stock one.

It will take alot from the D to beat most H or K swapped cars. Little be less to beat B swapped ones. If your goal is to beat those motors then you might want to shy away from All motor and go turbo.


It will cost more and you will not get the same power. But it is also fun to go all motor.

This is an allmotor D build I had planned for mine. Not sure if it will ever happen though now.

http://civic-eg.com/viewtopic.php?t=5184

-----------------------------------------

ok well SORRY for being an ASSHOLE, but i was testing u guys to c what u know, and what u can help me with,

but heres what im riding on,


D16Z6 HEAD: PORT-n-polished, shaved 0.000102, 3 angle valve job, skunk 2 springs,skunk2 valves, FULLY REBUILT head with the rest of the part oem honda,



D16A6 block: HIGH CR pistons, honed,oversized,fully rebuilt, balanced cranks, oversized bearings,


D16Y7 metal head gasket, TOOK OUT 2ND LAYER,


running P28 ,with skunk2speed TUNED, at madison WI,

al in a 94 vx shell,

all out, its making 245.7 WHP , NOT CRANK !

13:5:1 CR

i rape B's,H's,K's all day long if they are stock and swapped..


i just wanted to know if i can get soem more info, and yes stock injectors and fuel rail,



just few other options,


AND THE BEST THINg, i can beet on it all day long, and i KNOW it WONT blow as its has 1,35# miles currently, and turbo cars can blow any minute.


but good info, and just learn that the SUPRISE is a D NON-TURBO kicking integras,prelude ASSEES !

QUOTE: the engine code is a D16AZ6,

i know a guy named TK he did the SAME EXACT ENGINE, he was on here but go banned over some STUPID shit, along with other people,


i think his name was krystin and his screen name on ehre was like D16TKHONDA or something, but anywasse he got banned and teal HELPPED HIM ALOT, and teal kris says thanks, and sorry but man u banned like 5 people, and put banned for scamming but u CANT PROVE it, i just needed some info and brought this up, i had to post some shit so people dont think im spam, thanks and bye

- Thu Sep 04, 2008 12:34 am #68289 Im goin to have to call BS On that power. Will need proof. Dyno sheet and crap like that. almost 250hp out of what you listed is not gonna happen. You didnt even have an aftermarket cam. Its a pain to get 200hp all motor out of B series motors. it takes more than what you listed. lots.

People get banned for a reason. Cant argue with it. You do something stupid and you get what you deserve. No clue who any of those peaple are that you named, but if they didnt help out the site and community, they hurt it.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

[teal_dx]

- Thu Sep 04, 2008 1:07 am #68303 wow this thread is going into our junk yard hall of fame
No one in the history of civic-eg has made themselves look like such an ass by use of poor spelling and awful grammar

ps. when your boy KRYSTED or whatever his name was (the guy on here who typed a lot like you do) pays for the stickers I shipped him, he will be unbanned for scamming.

I helped him out a lot when other people gave him shit because they couldn't translate his posts into normal english, and he still felt the need to never pay for the stickers. So he is done.

But personally, I'd rather he not pay for the stickers so I have a fair reason to keep him and posts like this off the site

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Sep 04, 2008 2:12 am #68317

Im goin to have to call BS On that power. Will need proof. Dyno sheet and crap like that. almost 250hp out of what you listed is not gonna happen. You didnt even have an aftermarket cam. Its a pain to get 200hp all motor out of B series motors. it takes more than what you listed. lots.

People get banned for a reason. Cant argue with it. You do something stupid and you get what you deserve. No clue who any of those peaple are that you named, but if they didnt help out the site and community, they hurt it.

---------------------------

the guy posted a dyno sheet on here and his made like 230WHP, ill post mine, i didnt even name all the parts, the cam i cant name wat it is, as our company makes cam;s. im just checking on u guys if this site is as smart as i was told, and i do agree, and banding people, i c 4-5 eople get banned and come back and say WTF? the guy was liked and has like 3 stars for positive trans

- Thu Sep 04, 2008 2:15 am #68318

wow this thread is going into our junk yard hall of fame
No one in the history of civic-eg has made themselves look like such an ass by use of poor spelling and awful grammar

ps. when your boy KRYSTED or whatever his name was (the guy on here who typed a lot like you do) pays for the stickers I shipped him, he will be unbanned for scamming.

I helped him out a lot when other people gave him shit because they couldn't translate his posts into normal english, and he still felt the need to never pay for the stickers. So he is done.

But personally, I'd rather he not pay for the stickers so I have a fair reason to keep him and posts like this off the site

funny, because a FEW months ago krysted yes thats what it is, was in a accident and is still recovering mabey THATS why he didnt pay, u want my photobucket so u can c pictures of him , and when u look at his face u WONt even knwo who the fuck and what it is ? im sorry by th way he is a very good friend that lived 30 minutes or so, and spelling this is all done of my psp so its hard to type accurate with out typing for DAYs tring to make sure spelling i good, sorry

but yeah ill pay 4 the sticker, and he was going to give u a spoiler or a lip i think for free and he was up for it but then he had problems went out crashed flipped 7 times, and thats it mabey thats why, next time if ur smart id us should reasearch not just ban,