Civic-EG.com Forum 3.3.1

- Fri Oct 06, 2017 7:43 pm #6907769 please help..my bumper just doesnt fit nicely..there's gap here and there

p.s is this forum still alive

[teal_dx]

- Sun Oct 08, 2017 4:13 am #6907770 Front or rear? Is the gap where the corner meets the fender? If so, you can take out those plastic clips and use a bolt/nut with washers to pull them closer together. Yeah we're still breathing

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Oct 12, 2017 11:09 pm #6907860 Is it aftermarket?

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

[teal_dx]

- Wed Oct 25, 2017 3:17 pm #6908036 Yeah, I got the sizes I needed from the hardware store. Get stainless = no rust
It's also a good idea to get some of the plastic washers to put between the metal washers and the fender, just so you don''t have metal on metal, which could rub on the fender over time and create rust when the paint wears through.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Apr 15, 2021 11:59 pm #6909102 I wonder if he were able to fit his bumpers or have a replacement if not. Getting aftermarket parts is quite tricky. You really have to be certain when it comes to the size.