Civic-EG.com Forum 3.3.1

- Sun Feb 22, 2009 12:32 am #98014 Bump.

Trying to decide on suspension setup and this write-up was a TON of help.

Looking seriously at some PIC Apex's now but just trying to find the best price.

- Sun Feb 22, 2009 1:28 am #98024 been trying to find a good set up for a while, car's driving me crazy with all the bouncing

- Sat Jun 13, 2009 6:36 pm #122804 nice information man. really learned a lot! thanks!

- Sat Sep 12, 2009 6:48 am #143299 Ready to buy springs for my newly bought eg hatch but after reading this makes me think more. Very helpful read. Thanks for the help!

- Thu Oct 22, 2009 10:33 pm #152383 great write up. i'm just letting everyone know omni power no longer makes coilovers. they weren't able to keep it going with the way the market has turned. however, the blox coilovers are essentially the same thing. and the website in the OP's post is incorrect, www.omnipowerusa.com is the correct web address.

- Tue Feb 23, 2010 1:54 pm #177183 im just got kyb struts and Eibach springs and put'em in front but i didnt get the rear set-up and im still rinnung the stock rear suspension can this cause a problem? the car isnt on the road yet and just would like to have a heads up on what i may be instore for..

Cheap, Fast, or Reliable.
but you can only pick two..

- Fri Sep 03, 2010 4:48 am #211954 Great info I really learned a lot here

- Thu Dec 30, 2010 3:08 am #230441 Anyone had a HKS lowering springs before?
How good they are actually?

- Fri Mar 18, 2011 2:07 pm #244662 awesome write up

Support Japan buy JDM

http://civic-eg.com/viewtopic.php?t=19373

- Mon Oct 17, 2011 6:09 am #278043 anyone using GAB HA series coilovers??

build thread: viewtopic.php?f=61&t=17304

- Sun Nov 20, 2011 4:14 am #282117 this is why i joined this forum some seriously good write ups!!!

95 eg coupe (b16)

- Tue Jun 12, 2012 10:17 pm #308063 ok so i have a '92 hatch and i've already purchased my koni reds. i've been researching for awhile on spring rates that will fit my needs but i am still a bit lost. i would like to drop the car around 2-2.5' all around. The car is almost completely DD for now and i want to retain a good amount of my stock comfort (GF and whatnot). When i spoke with someone at GC they recommended 350f/250r and said 450f/350 would be TOO rough. However after reading a few forums here and a few other sites it seems the consensus is that's too low a rate to run w/o running into problems like rubbing and bottoming out. I've also seen suggested rates of 380f/300r, will there be a noticeable difference?

15" rims, 195/50/15 tires, +38 offset. No other suspension upgrades.
Anyways thanks for any help/suggestions ahead of time!

*LBC*

- Thu Jun 21, 2012 1:53 am #308946 i found this and this will also help with choosing the right suspension

http://www.tein.com/classroom/lesson_1.html

your car is your story, dont let someone else write the book.

91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348

- Mon Oct 22, 2012 2:12 am #318355 what do you guys over here think about amr's?

- Tue May 28, 2013 2:15 pm #332195 anybody have the 1.5/1.0" drop by tanabe?