Page 1 of 1
rear lower control arm HELP!!!!!
Posted:
Sat Apr 02, 2011 10:18 pmby deadxxxsoul
my rear aftermarket LCA's bushings on my 93 EG hatch are done ...need new ones 3 on each side...does any1 know where can i get replacement or do the stock bushing work if i press then in....need help ASAP ....
Posted:
Sat Apr 02, 2011 10:33 pmby JUICE
you could burn out the old and get energy suspension bushings pressed in or just buy a set of aftermarket LCA's..
Posted:
Sat Apr 02, 2011 11:13 pmby familyEGuy23
I used teals method super easy and u don't need to take to a shop and get "pressed " in
http://www.civic-eg.com/viewtopic.php?t=16
Posted:
Sat Apr 02, 2011 11:24 pmby deadxxxsoul
thx guys but i have aftermarket LCA ...those r the 1's with the bad bushings
Posted:
Wed Apr 06, 2011 6:35 amby eggman95
I would think they are the same size as stock. Just compare them to your stock LCA bushings if you still have them.
Posted:
Wed Apr 06, 2011 8:31 amby Greasedmonkey
Imma go out on a limb and say you have Blox LCAs or that style LCA.
Your best option is to get new ones. The aftermarket bushes work on Stock LCAs, and I dont think any one makes replacement bushes for aftermarket ones.
Posted:
Wed Apr 06, 2011 8:36 amby chnzgoofball
if you have blox lca u an actually fit energy suspension bushings in there you just have to trim down the bushings slightly but in my honest opinion its not worth it you might as well save the money and pick up new lca skunk 2 lca are pretty good they are hybrid polyurathane meaning half poly half rubber or you can always go for function 7 which i wanted and are hard to get due to being back ordered..