Technical Topics specific to the Hatchback body - NOT where you post pics/build specs of your car.
User avatar
By typeS_06
#88717 Im pretty sure my altenator is going. Does anyone have a DIY removal/install for an altenator? I can seem to find one.

Thanks for the help.
User avatar
By 95projektvic
#88718 dissconnect the battery, discconect the wires from the alternator, remove the the mounting bolts, remove alternator.
User avatar
By typeS_06
#88719 To easy, Thank you very much.
User avatar
By 95projektvic
#88720 yep. your welcome
User avatar
By vtec_gloucester
#88781 if you didnt find one in the how to section feel free to snap some pics and make a how to for this :thumb:
User avatar
By suspendedHatch
#88917 Removing the alternator is actually a lot harder than it sounds. I like to jack the car up and squeeze it out between the block and the axle. But now that I have air tools (haven't changed the alternator in about 5 years) I'll probably just remove the axle and make it a million times easier.
User avatar
By typeS_06
#102253 Turns out that I didnt even have to replace it.......yet. Every time I start the car up, the battery light comes on, and as soon as I rev up the engine a little, the light will go out.
I assume with such the cold weather we had, and when I started the car up, I didnt rev it up and and the altenator wasnt charging.... :?
User avatar
By typeS_06
#109488 So just an update. The old altenator went for another few months until the other day when the car quit on me at work.

Managed to find a used one, but when I got under the car to get that pin out, nothing would move. That pin is siezed in there for sure. We dont have any major heat so I have to take the car into a garage to get the old one off. Does anyone have any hints?

Were working without a hoist as well.
User avatar
By Sentry
#109495 Pick up a little butane torch from a smoke shop or a convenience store. I keep one in my box for busting tough nuts.
User avatar
By teal_dx
#109538 I had to end up destroying one of those pins on a 96 civic. I beat it to death, used pb blaster and fire and it was still not coming out.

I was so pissed that day.