Civic-EG.com Forum 3.3.1

- Wed Apr 08, 2009 12:23 am #108983 Okay, been having some probs with my D series engined civic . Its an automatic also.

When I stop at a light, the car has started cutting out and can be a pain to restart. On occasion it has also cut out as I am slowing down to stop.

I thought this could be linked to the fact that when I hit the loud peddle I see a bit of smoke coming from the exhaust as i accelerate. I figured this could be a cause, something to do with the rings but i am unsure. Its had a recent service and new plugs.

Why do you think this could be cutting out???


Thanks in advance!!!

- Wed Apr 08, 2009 1:03 am #108995 BTW, its a D15B7 if that helps at all.

- Wed Apr 08, 2009 1:50 am #109005 could be a number of possibliltes

Battery connection
grounds
fuel pump
main relay
short.
etc...

what do you mean cut out when you are slowing down to stop?

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

[teal_dx]

- Wed Apr 08, 2009 2:18 am #109012 do you have a check engine light on?

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Apr 08, 2009 2:22 am #109013 maybe the iacv i had that problem when my mini me was runnin last night

#6 member of "White sedans FTW" club

- Wed Apr 08, 2009 3:11 am #109024 also, could be the rotor button, igniter, or possibly a clogged fuel filter.

- Wed Apr 08, 2009 3:31 am #109033

do you have a check engine light on?

Now you mention it. Yes, it came on so i pulled over and had a look at the engine for any obvious problems, i restarted it and the light went away!!

- Wed Apr 08, 2009 3:33 am #109034

could be a number of possibliltes

Battery connection
grounds
fuel pump
main relay
short.
etc...

what do you mean cut out when you are slowing down to stop?

It seems to be runnung okay, then i slow down and when im about to stop, it just dies. Then i try to restart the car and it turns over sometimes for up to 5 secs then starts. But the next time i stop or slow it will be fine

- Wed Apr 08, 2009 12:53 pm #109107

also, could be the rotor button, igniter, or possibly a clogged fuel filter.

clogged fuel filter wouldn't cause smoke.. if it was bad enough to stall the car, on occasion, at idle, it would kill it everytime he accelerated hard at all..

Fast
Cheap
Reliable

Pick Two, You Can't Have All Three.

- Thu Apr 09, 2009 4:09 am #109315 *didnt see part about smoking, your right, my bad.

but the smoke could have nothing to do with this problem at all.

- Thu Apr 09, 2009 5:19 am #109341 Ive been doing a little research myself and found out they suffer from a main relay issue? does anybody know anything about this??

I did a compressiond test and one of the cylinders was about 12 psi lower than the rest so i guess that the rings need doing. i cant see how this would be a problem though, surely it would be a constant cut out rather than a occasional issue.


main relay then i guess. any idea on the cost of one of these relays?

- Thu Apr 09, 2009 5:30 am #109352 12 psi under norm isnt that bad ... i dont know the exact specs, but as i remember, the lowest allowed psi before replacement was 150psi.

When my z6 rings in cylinder three went bad, the cylinder was at 50 psi max. and even then, it started, it just misfired on that cylinder.

Cant remember how much the main relay was but i want to say like $15-30.

- Thu Apr 09, 2009 7:11 am #109373 resolder it and save your cash for a victory 24-pack

- Thu Apr 09, 2009 6:46 pm #109471

*didnt see part about smoking, your right, my bad.

but the smoke could have nothing to do with this problem at all.

word.

but after the compression test brings back a little lower reading that could be the reason for the smoke.. does it smoke full time or just under heavy acceleration?

EDIT: under accel as per your first post.. sounds to me like your burning oil cuz of bad rings.. what were the readings across all 4 cylinders compared to factory specs.. being 12 psi under isn't bad.. but if your whole assembly is 50 psi under, and one is 62, that is really bad.

Fast
Cheap
Reliable

Pick Two, You Can't Have All Three.

- Wed May 06, 2009 7:18 am #115249 just thought i would add something due to the fact your car has an auto. The trans could be failing to come out of lock-up and stalling the engine. I would check the condition of the trans fluid ie; (burnt smell / color), just as a precaution.