- Sat Jun 16, 2007 9:49 am
#11255
I had an appointment today to have some goodies installed, but the guy didn't receive something important, should come in next week, so I'll be working on the car then or else we have to do things twice...
- VTI (aka Si?) 260mm front discs and calipers etc. in stead of 240mm
- VTI rear discs (in stead of drums) and calipers,
- Goodridge braided brakelines,
- strutbars front; lower (upper is already there),
- strutbars rear; upper and lower
- swaybar front; will be 21mm from a VTI, coup? has stock 18mm
- swaybar rear; also from a VTI,
- CRX VTEC (EE8) main brake cilinder (don't know what it's called in English)
- EE8 brake pressure distributor (don't know what it's called in English)
- and off course DOT 5.1 brake fluid.
Also, new oil for the engine with a new oilfilter
- VTI (aka Si?) 260mm front discs and calipers etc. in stead of 240mm
- VTI rear discs (in stead of drums) and calipers,
- Goodridge braided brakelines,
- strutbars front; lower (upper is already there),
- strutbars rear; upper and lower
- swaybar front; will be 21mm from a VTI, coup? has stock 18mm
- swaybar rear; also from a VTI,
- CRX VTEC (EE8) main brake cilinder (don't know what it's called in English)
- EE8 brake pressure distributor (don't know what it's called in English)
- and off course DOT 5.1 brake fluid.
Also, new oil for the engine with a new oilfilter

