Technical Topics specific to the Hatchback body - NOT where you post pics/build specs of your car.
User avatar
By chrono404
#118792 Sounds like an ECU Issue. In your Engine bay there is a fuse box, Take the 7.5 amp "ECU Backup" Fuse out and leave it out for a few mins, put it back in and See if that fixes it.
User avatar
By drago742gtr
#118815 :shock: he(dtor9e2g) finally posts o m g lol

he says it dont got over 3 grand but when i looked at it as soon as the throttle body starts to open its starts to die out and when u open it up like full throttle it cuts off


i wonder if i can post of pics of his car now that he actually posted on the site lol
User avatar
By Chance
#118819
drago742gtr wrote::shock: he(dtor9e2g) finally posts o m g lol


Your acting like he's been a member for years and finally posted.. haha
User avatar
By drago742gtr
#119017 lol i know i just been tellin him to post for the longest now so he can get some help with his car so he can have it runnin he was just being lazy till now but he found a blown fuse and its goin to replace it and check the fuel lines and see whts happens and he tryed changin ecu with a p28 and it still has the some problem
User avatar
By Greasedmonkey
#119093 check to see if the tps and the map sensor wiring got reversed.
User avatar
By dtor9e2g
#119585 javascript:emoticon(':thumb:') bump Greased monkey they were backwards and they look the same :?
User avatar
By Greasedmonkey
#119652
dtor9e2g wrote:javascript:emoticon(':thumb:') bump Greased monkey they were backwards and they look the same :?


yea, that will happen. Does it run better now?
User avatar
By drago742gtr
#119668 yea its runnin better he called and told me im dyinn to drive it
User avatar
By dtor9e2g
#120157 yeah it runs like a champ took it for a spin yesterday be in mind
ihave no catback and im having an issue with the front brakes

its almost as if they were locking up but i think i might need to
put the little screw in the rotor not sure let me know what u think
User avatar
By Greasedmonkey
#120306 that lil screw in the rotor isnt all that important. once its all put back together, that screw is useless.
User avatar
By dtor9e2g
#120870 okay do you think my extended studs play an issue
User avatar
By dtor9e2g
#122035 now i need some help got everything running good now it wont stop
overheating some give me some advice :x
User avatar
By Greasedmonkey
#122099 check to see if the fan is working. if it doesnt come on, unplug it from the harness and power it from the battery to see if it comes on. if that works its either the fan relay or the fan switch.