Civic-EG.com Forum 3.3.1

- Wed Jun 17, 2009 4:49 pm #123662 ok well i was cleaning up my garage and i found a p32 intake manifold and i was thinking p32 is practically a d16z6 intake manifold right.?
so do you think if i swap intake manifold all the parts will be interchangable? and is it worth having a p32 intake mani in a d15.?

93 civic sedan- d15z1-intake

00-integra sedan-b18b1- intake,ngk sparkplugs,ngk sparkplug wires,no a/c,no p/s,camber kit, coilovers


sedans ftw!!!!!!!!

[teal_dx]

- Wed Jun 17, 2009 6:42 pm #123689 Z6 manifold is stamped P08, I'm not sure what a P32 is from
All the D series IM's bolt up, but things like fuel rail bolt spacing and sensor location is what is different. Also throttle able brackets usually need to be modified.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Jun 17, 2009 7:15 pm #123692 yeah seems a bit wierd i think p32 is d16a..? im not sure tho

93 civic sedan- d15z1-intake

00-integra sedan-b18b1- intake,ngk sparkplugs,ngk sparkplug wires,no a/c,no p/s,camber kit, coilovers


sedans ftw!!!!!!!!

- Wed Jan 26, 2011 10:26 pm #235587 i know this is old but i think i might be useful to others.

p08 are 92-93 intake manifold off d16z6
p32 are 94-95 intake manifold off d16z6

hope this helps people

- Thu Jan 27, 2011 4:52 pm #235762

i know this is old but i think i might be useful to others.

p08 are 92-93 intake manifold off d16z6
p32 are 94-95 intake manifold off d16z6

hope this helps people

Not Necessarily true, On Chrono404's D16z6 he pulled from his 95 Delsol Si and it has "p08" stamped on the back of the intake and on the head. On his old 94 EX Coupe had "p32" Stamped on the intake manifold.

The Delsol was assembled in Japan, His old coupe was assembled in Ohio, USA. Its Probably an Assembled in US vs Assembled in Japan thing.