oem camshaft????

B16, B18, B20
 Reply

By jdmpipedreamd16
- Thu Jun 18, 2009 9:41 pm #124140 no #'s but intake has a h on it and the exaust cam has a f on it tho :?

By jdmpipedreamd16
- Thu Jun 18, 2009 11:18 pm #124176 yes im trying figure out some history on the motor and tune the corectly so i have it for along time ya know????
User avatar

By egsedanguy
- Thu Jun 18, 2009 11:21 pm #124178 ok. so your building a engine? what engine do you have? were did you get the cams??? are you building with used parts. im just not sure what it is you need to know. is it a ls or a vtec?
User avatar

By Greasedmonkey
- Fri Jun 19, 2009 3:20 am #124223 It would help us out alot to know what motor you have. B D K H F J?

By jdmpipedreamd16
- Sat Jun 20, 2009 5:41 pm #124669 :thumb: ok sorry and no im fixing the crap that some dumb kid who thought he knew his shit so cause it is my dd. so here it is the motor is a jdm B16A what im trying to do is find out what more i need to fix that he f`d up motor runs just not like it should parts that dont belong on it are on it and thats just not how i roll.
User avatar

By Greasedmonkey
- Sat Jun 20, 2009 5:50 pm #124670 It would still help if you got a picture of the cams themselves. Until then check out this thread. It might help you out.

http://www.jdmuniverse.com/forums/how-t ... -cams.html

By jdmpipedreamd16
- Mon Jun 22, 2009 12:03 pm #124919 sorry but the cams are in the motor and like i said its my dd but rhanks for the help :thumb:
User avatar

By egsedanguy
- Mon Jun 22, 2009 4:17 pm #124987 ok so the engine works right? well then the cams are most likely stock b16 cams. or after market. and take that valve cover off and look at the cams. take a pic and post it.
 Reply
Return to B Series