Civic-EG.com Forum 3.3.1

- Mon Jul 13, 2009 12:02 am #129962 I really want to put a lip on my ej but i don't want a one that is going to scrape every time on a drive way since the car is already doing that in some drive ways. What lip can i get that will not make me cringe every time i pull into my drive way? Thanks for the advice guys!

[Ajax1989]

- Mon Jul 13, 2009 2:02 am #129974 get what ever lip you like and that would look good on your car

but GET a polyurthane<- bad speller
it wont brake, crack, but it will bend

but goin over speed bumps, goin up hills and driveways, try goin at an angle

- Mon Jul 13, 2009 3:37 am #129987 get a stock front lip. can never go wrong with that.

a lip to stay away from is a spoon/spoon style lip.. those fuckers hang so low.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Mon Jul 13, 2009 5:08 am #130006 I agree with rob... stock lips look very clean/simple... also, if you do decide to go aftermarket, then get polyurethane like 94_jdm_ferio said... no matter what you do (unless you literally cut it) its impossible to break a poly lip

- Mon Jul 13, 2009 5:36 pm #130090 Ok cool thnaks guys for the help now the quest for one is on. thanks again