- Wed Jul 22, 2009 12:08 am
#132273
wait, wasn't the KKK all white too
nah JKs
Back on topic, if the remote for the stereo as connected to the antenna wire instead of the remote wire, the amp would turn on only when the radio was on and not the CD payer, but it would still work w/out cutting in or out. Like ppl said could be a loose wire somewhere, best is to get a multimeter or test light and check your power cables when the stereo is on to see if they are being interrupted. If the +ve and -ve are good, check your remote (should be blue) but it can be pink if you prefer that and finally check your rcas, i did that and they all checked out so i started playing with the sub wires after that and ound out i had a loose terminal.
What kind of amp are you using, 2ch or 4ch. try un-bridging your sub and just running it off the right or left terminal
#7 member of "White sedans FTW" club