Civic-EG.com Forum 3.3.1

- Sat Jun 20, 2009 11:36 pm #124715 anyone have any recomondations on installing the password carbon kevlar srs delete tray? no instructions...cant find anything except people bitching that they like it or dont...i dont care...i just wanna know any non ghetto ways of doing of an install...not double side tape it or duct tape it..........please help!! thanks!

- Sat Jun 20, 2009 11:46 pm #124718 No idea, Glue?
I did see some brackets once, also in this topic listed below..

Read this topic, maybe you see a solution..

http://www.honda-tech.com/showthread.php?t=2202077

Civic-eg PANDA CREW!

Dutch Champion Karts 2007
www.rosracing.com

- Sun Jun 21, 2009 12:11 am #124719 well theres many ways glue is one of them epoxy is another which is glue technically.....ummm could use rivets stuff like that

1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1

- Sun Jun 21, 2009 1:48 am #124724 yeah i had thought about rivets..and a few other things like that..just kinda nervous about trying to drill or screw into the ck...think it will shatter or crack it? and if you have ever seen one of the trays the way it is isnt reallt like a flat surface for gluing...another thing im worried about lol..dont want to mess up the dash

was i supposed to keep the air bag deal itself and mod that or just have a hole in my dash? srs was deployed so i took it out and tossed it

- Sun Jun 21, 2009 3:44 am #124733 double sided tape wouldnt be a bad idea so you wouldnt fuck your dash up....but get the 3m used for moldings and stuff

- Mon Jun 22, 2009 4:44 pm #124994 i will try that...might have an idea im going to try...i will post pictures if i get a good turnout...

- Sun Aug 09, 2009 5:34 am #136808 i just drilled a hole on both sides in the middle about half way down the tray. then i used two pieces of tin on the underside to make small hooks. i put a black screw through the holes and into the tin then all you have to do is go to the underside and zip tie the hook to the frame. it doesn't move and it looks very nice.

It was on company property, with company property. So, double jeopardy, we're fine.

- Mon Aug 10, 2009 12:32 am #136910 pics?

#11 member coupe crew

BurqueB16's Build

- Mon Aug 10, 2009 9:22 pm #137127 the pictures are not the best quality but they should get the idea across. so here it is from the top.


here is the screw close up. i used a washer as well.

here it is from underneath.

close up of the tin strap i attached the screw to, with a hole at the end to attach the zip tie to.

then i ran the zip ties under this bracket to anchor it down.

once you attach it to the other strap on the other side and tighten the zip ties (you have to chain a couple together so its long enough) its not going anywhere. hope this helps.

It was on company property, with company property. So, double jeopardy, we're fine.

- Mon Aug 10, 2009 9:28 pm #137130 haha. looks fine... as long as it sits nice and dont move.. plus that carbon looks tasty...

Hatch http://civic-eg.com/viewtopic.php?t=27660
Sedan(gone) http://civic-eg.com/viewtopic.php?t=7462

- Mon Aug 17, 2009 5:03 pm #138325 Is this only for the 95 cuz they had the air bags?

- Tue Aug 18, 2009 11:44 pm #138668 i think it is also available for the 96-00 civic as well. go to password jdm

It was on company property, with company property. So, double jeopardy, we're fine.