Civic-EG.com Forum 3.3.1

[Apexracing]

- Mon Sep 28, 2009 4:32 am #147774 hey guys, im going to be changing my headgasket next week and i need either a arp stud get or a oem bolt kit and a good place to by either, any reccomendations on a good head gasket and where to buy it from ive searched and searched and i just cant come to any conclusion by my self. thanks.

[Ajax1989]

- Mon Sep 28, 2009 5:00 am #147785 arp
http://fjdistributors.com/index.php?cPath=108

and you can get a headgasket from Fj as well
or go to your local auto parts store, there normally cheap and you get a warrenty too

[Apexracing]

- Mon Sep 28, 2009 5:02 am #147787 are the head studs the same for the d15 and the d16?

[Ajax1989]

- Mon Sep 28, 2009 5:13 am #147788 that i dont know

[Apexracing]

- Mon Sep 28, 2009 3:47 pm #147858 any one know it d16 studs will work on a d15?

[teal_dx]

- Mon Sep 28, 2009 4:28 pm #147872 call ARP's customer service, they will tell you for sure. I called them once, they were helpful

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Sep 28, 2009 8:22 pm #147918 jdm d15b vtec, yes. all ten are the same length.
usdm d15b7, no. one will be too long or too short

street machines > dyno queens
z6 turbo power FTW tuned on crome

[Apexracing]

- Tue Sep 29, 2009 12:13 am #147966 ok thanks, ill just hit up my dealer then.

[Apexracing]

- Tue Sep 29, 2009 5:38 am #148004 ok i ordered a felpro gasket kit for my sedan, and i'm ordering a oem bolt kit from my dealer. along with a haynes manual and a torque wrench.

- Wed Sep 30, 2009 7:03 am #148212 www.hondapartsnow.com

best for OEM!!!!

[Apexracing]

- Wed Sep 30, 2009 4:43 pm #148260

ok so number 13 is one of the head bolts i assume. and i need ten of them correct.

[Ajax1989]

- Wed Sep 30, 2009 5:20 pm #148277 yupp 13 is what you need, and 10 of them is correct

and when changing your head gasket, you dont need to do all that shit
just un bolt the 10 bolts (14mm) and unbolt the header and the intake mani and then pull the head off then put the new gasket on and reverse what you did

- Thu Oct 01, 2009 1:37 am #148370 Felpro gaskets suck!

Honda OEM 3 layer only.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

[Apexracing]

- Thu Oct 01, 2009 3:58 am #148386

Felpro gaskets suck!

Honda OEM 3 layer only.

really i heard they were good. well i guess i can use the other gaskets in the kit, ugh thanks though.

- Sun Oct 04, 2009 3:32 pm #148826 yeap! and if u want a long lasting head gasket!! get the COMETIC gasket. very very durable!!!!! On ebay.com. it's like 60 bucks i think. if u wana upgrade..