Wire tuck (pics) updated! 10/14/09

Technical Topics specific to the Hatchback body - NOT where you post pics/build specs of your car.
 Reply
User avatar

Wire tuck (pics) updated! 10/14/09

By biggnutz123
- Sat Oct 03, 2009 5:55 pm #148740 Hey guys started doing a mild wire tuck on my bay. Im not gunna tuck everything mainly just the stuff down the fenders and the battery area. Heres some beginning pics.
Image
Image
Once the tucks all good ima clean the bay down really good too :)
Last edited by biggnutz123 on Wed Oct 14, 2009 11:02 pm, edited 1 time in total.
User avatar

By flyinryan122
- Sat Oct 03, 2009 7:19 pm #148747 Looks good so far. If you'd really like to tuck some stuff, i could snap some pics of how i did my engine harness, (feeding it through the center of the fire wall) But made it so i still kept my heater core. Most people use the hole for the heater core and then take all that stuff out. I like having a heater, either on cold days, or on a day the car is overheating i can turn it on.
User avatar

By biggnutz123
- Sat Oct 03, 2009 9:39 pm #148757 Ya dude that would be sweet if you could i wanna keep my heater too lol!
User avatar

By Punksz6
- Sun Oct 04, 2009 9:22 pm #148877 Nice work so far!! :thumb:
User avatar

By biggnutz123
- Wed Oct 14, 2009 11:16 pm #150785 So heres the almost finished product! no more a/c wiring only thing left is that dumb deal on the fire wall i need to remove and get a cap.
Image
Still not to shure if i wanna relocate the batt. :?
Image
Image
Image
The engine bay is still in need of a good scrubbing but as you can see the front suspention is pulled apart so till i get it rolling again ittl be dirty :thumbdown:
User avatar

By Greasedmonkey
- Wed Oct 14, 2009 11:23 pm #150792 i think you should have routed the wiring into the little frame part instead of on the out side. protects the harness a bit more.
User avatar

By biggnutz123
- Wed Oct 14, 2009 11:28 pm #150801 thats not a bad idea now i need a coat hanger! lol
User avatar

By That One Dude
- Tue Oct 20, 2009 4:25 pm #151869 That's what the inner fender well is for. And wire loom. You could get a couple of Adel clamps and bolt the harnesses to the frame or something metal that won't budge.
 Reply
Return to Chassis - Hatchback