Civic-EG.com Forum 3.3.1

- Wed Oct 14, 2009 12:34 am #150573 hi everyone i am getting my hatch sprayed and i am removing moldings and windows to make it easier for the spray painter does anybody know how to remove the antenna from the roof?

i have tried undoing both screws and pulling it a little bit but i do not want to break anything so help would be appreciated thanks.

- Wed Oct 14, 2009 12:42 am #150577 the antenna cable goes down through the a pillar then to the radio. just cut it off at the top unless u wanna keep it. then u have to pull it through but its taped to all the wires rinning through that pillar. kind of a bitch.

single slammer = one cam of fury.


si = supercharger inside

[teal_dx]

- Wed Oct 14, 2009 1:46 am #150597 I took the black plastic cover off and was able to push the antenna down into the hole a little bit for painting. Then pulled it out after paint and it was good to go

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Oct 14, 2009 1:51 am #150601 x2 ^^ I did the same thing as Teal!

- Wed Oct 14, 2009 3:11 am #150622 U guys r so much less destructive than i am.

single slammer = one cam of fury.


si = supercharger inside

- Wed Oct 14, 2009 8:31 am #150656 ohh yeah that's a better idea ill remember not to take advice from ikon jk thanks heaps guys for the advice much appreciated

- Wed Oct 14, 2009 11:24 pm #150794 ive replaced my antenna...its not that hard to take out, its putting it back in thats a bitch. I would suggest doing what Teal said. Much easier.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Fri Oct 16, 2009 6:02 pm #151233 yeaa..i bought my car and the antenna was broken off so i picked one up at the junkyard but i have no clue as to where to start...how do you actually do it?

1993 Civic CX Hatch
Just bought the car,
next step, fast