Civic-EG.com Forum 3.3.1

- Sun Nov 01, 2009 2:36 am #154061 Hi friend. I am starting this thread due to the good suggestion of a friend of the forum.

I am sending this question with other point of view and trying to solve the issue that I ask in my other thread , http://civic-eg.com/viewtopic.php?t=11863.

Basically my problem what suspension kits, shocks/springs or coilovers are available for 1992 JDM Civic sedan with EG8 suspension? and where can I find it?

Thanks in advance for your great help,

- Sun Nov 01, 2009 6:31 am #154091 it should be hard to find at all actually. first thing is first.. what do you want out of your suspension after that it should be all down hill from there. look in the sticky's and you will find a thing on suspension on how to choose what kind you want.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Sun Nov 01, 2009 1:45 pm #154118 Thanks for the reply, basically I need a sport street suspension, sport yet functional with enough clearance.

I found some diferences from Tein, for example:
SUPER STREET (w/o Upper Mount) TEIN UK LIMITED QSA00-AVSS2
SUPER STREET (w/o Upper Mount) TEIN UK LIMITED QSH48-AVSS2
SUPER STREET (w/ Upper Mount) TEIN UK LIMITED GSH48-B1SS3
MONO FLEX (w/ Spring) TEIN UK LIMITED GSH48-F1SS1 -- Rr EYE type bracket model only
TYPE BASIC TEIN UK LIMITED QSA00-CVSS2 -- Rr FORK type bracket model only
TYPE BASIC TEIN UK LIMITED QSH48-CVSS2 -- Rr EYE type bracket model only
TYPE N1 Steel N1 Model Front TEIN UK LIMITED DSH48-E1MN2 -- Rr EYE type bracket model only
TYPE N1 Steel N1 Model Rear TEIN UK LIMITED DSH49-E1MN2 -- Rr EYE type bracket model only
S.TECH TEIN UK LIMITED SKH26-AVB00 -27mm (Fr) -20mm (Rr)

Then it should be an option liker this from Tokico too. I remember that I saw something like this for the Tokico HPK suspension kit. I think that the USDM kit is HPK-210 and the JDM is HPK-T210. I saw something like this, but I can find it again.

Also I need to check if springs are the same.

I only need to know my options to see what can I find.

- Tue Nov 03, 2009 3:49 pm #154525 Well friends, basically I found the info that I was looking for. I have the JDM EG, ITR or Integra Type-R Eye-Type Rear LCAs that is great from a point of view but limit me to only few suspension options and also include the problem to match between Civic/Integra JDM/USDM parts.

I have seen searching and the best solution will be to change the rear LCAs for fork-style ones and I could use all the USDM suspension option that exist. Inclusive I found that front JDM and USDM parts for EG/EH 92-95 Civics are the same, then allowing me to select between large quantity of parts available.

Ok but where I live all 92-95 Civics have the same Eye-type rear LCAs and 96-00 rear LCAs are different than EG ones, so which billet rear LCAs for EG do you recommend me? I saw that Funtion7 are awesome and Skunk2 nice too, but what about Megan or Blox ones. My budget is tight but I do not want to buy over-rated parts or cheap dangerous ones. Comments are welcome about this.

- Wed Nov 04, 2009 2:55 am #154676 Friends a question what are the OEM Honda parts numbers of the R & L USDM 92-95 rear LCAs?