Civic-EG.com Forum 3.3.1

- Tue Jan 05, 2010 3:57 am #165844 so i have officially started my project car
94 eg8 white
im getting an intake mani and a turbo mani for 140 this weekend
i dont wanna build my motor its a jdm d15b with like 60k on it
is the intake mani over kill? its a nice one i dont remember what kind but heres a pic
http://nh.craigslist.org/pts/1537059543.html
my goal is around 175 hp on stock internals with a good tune
so u think the mani is worth it?
thanks guys

- Tue Jan 05, 2010 4:00 am #165846 it'll help a little i'm sure. but, your stock mani would be just fine for your hp goal.

600whp Turbo 84mm LS/Vtec Drag Hatch

- Tue Jan 05, 2010 4:11 am #165852 thats what i was thinking but worst comes to worst i just re sell it
i mean i looks really good so i might just keep it haha

- Tue Jan 05, 2010 4:20 am #165854 put it toward other parts of the project that you'll need for sure..

maybe... intercooler, charge pipes, BOV, oil line kit, injectors, boost guage just to name a few. not sure what all you got together yet..

I've about got everything i need to boost my LS

check out my thread in the BOOST section

600whp Turbo 84mm LS/Vtec Drag Hatch

- Tue Jan 05, 2010 4:29 am #165860 yeah i know what ur saying just get basics
im getting a walbro fuel pump cheap sometime this week
once i have enought to start the project ill make a thread
i really gotta take car of my honda rust first but its too cold for sanding or painting soo that will wait
are 450injectors with a resistor box a good choice?

- Tue Jan 05, 2010 4:35 am #165862 i've been shopping for injectors for a while now....


i've decided i'm not gonna go with some junk used dsm 450's and have to wire up a resistor, or buy refabbed ones with a resistor for like $150. I'm just gonna buy some High Impedance Precision 440's for $200. not gonna dick with a resistor and have a warranty.

.. about to order my walbro too

600whp Turbo 84mm LS/Vtec Drag Hatch

- Tue Jan 05, 2010 4:38 am #165865 and for the rust part.....

I've got the rear quarters off a donor. guess i'm gonna get it boosted THEN do the body work and get it painted.. sucks though cause my rear cancer is bad... but its cold as #$@$! out!

600whp Turbo 84mm LS/Vtec Drag Hatch

- Tue Jan 05, 2010 4:38 am #165866 yeah
where u getting ur injectors from ?
im just kinda piecing my turbo stuff together as i find good deals locally
the walbro i might get is like 70 bucks
is that a good deal?

- Tue Jan 05, 2010 4:44 am #165868 im totally in that boat with you lol
i found a place online that sells the rear quarters for 65 bucks for both
def ordering those suckers soon

- Tue Jan 05, 2010 4:46 am #165870 type in "precision 440cc" on ebay for those to come up.


walbro's go between 90-100 new so... but, there's two different kinds. its something with a gear thats in them. one has a brass or copper gear and the other has a plastic gear. not sure if they're labeled differently like one being "high flow" or something but, I'm pickin up one from a local shop with the "metal" gear for $90 plus $20 for the install kit....

600whp Turbo 84mm LS/Vtec Drag Hatch

- Tue Jan 05, 2010 4:49 am #165871

im totally in that boat with you lol
i found a place online that sells the rear quarters for 65 bucks for both
def ordering those suckers soon

which site? how big are the pieces? i cut out almost the entire ass-end of a donor hatchy

600whp Turbo 84mm LS/Vtec Drag Hatch

- Tue Jan 05, 2010 4:53 am #165872 i shouldnt say i found it bc i hapened to stumble apon it on here
its called www.rustrepair.com seems like its a great deal

- Tue Jan 05, 2010 4:57 am #165873 those are good, but i needed bigger pieces



back on topic...

wait to get the intake till down the road when you need it to make crazy power

600whp Turbo 84mm LS/Vtec Drag Hatch