Civic-EG.com Forum 3.3.1

- Wed Jan 20, 2010 11:03 pm #169851 hi..im new here and i have a question im in the prosses of doing a wire tuck im taking off my heat but idnt know what to with the hoses that connect to the heater? do i take them off and wat do i do after they are 2 and they leak anti freeze. thanks. i have a coupe.

- Thu Jan 21, 2010 12:16 am #169870 well if your taking out the heat and there are two connections id take a hose and gen it hooked up so they route into each other....redirect the flow right back into the block....

1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1

- Thu Jan 21, 2010 3:08 am #169901

well if your taking out the heat and there are two connections id take a hose and gen it hooked up so they route into each other....redirect the flow right back into the block....

what he said. just connect them with a metal U pipe so they don't get pinched shut.

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Thu Jan 21, 2010 3:12 am #169903 so no anti freeze is going to leak if i block them off?

- Thu Jan 21, 2010 1:01 pm #170016 their saying to reroute them not to block them. The goal is to bypass the heater core.

[teal_dx]

- Thu Jan 21, 2010 1:55 pm #170023 Loop them like mentioned above Worked for me

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Jan 21, 2010 7:10 pm #170071 ok sounds good thanks guys,